9 November 2017 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
The use of error-correction codes (ECCs) with advanced correction capability is a common system-level strategy to harden the memory against multiple bit upsets (MBUs). Therefore, the construction of ECCs with advanced error correction and low redundancy has become an important problem, especially for adjacent ECCs. Existing codes for mitigating MBUs mainly focus on the correction of up to 3-bit burst errors. As the technology scales and cell interval distance decrease, the number of affected bits can easily extend to more than 3 bit. The previous methods are therefore not enough to satisfy the reliability requirement of the applications in harsh environments. In this paper, a technique to extend 3-bit burst error-correction (BEC) codes with quadruple adjacent error correction (QAEC) is presented. First, the design rules are specified and then a searching algorithm is developed to find the codes that comply with those rules. The H matrices of the 3-bit BEC with QAEC obtained are presented. They do not require additional parity check bits compared with a 3-bit BEC code. By applying the new algorithm to previous 3-bit BEC codes, the performance of 3-bit BEC is also remarkably improved. The encoding and decoding procedure of the proposed codes is illustrated with an example. Then, the encoders and decoders are implemented using a 65-nm library and the results show that our codes have moderate total area and delay overhead to achieve the correction ability extension.
12 November 2019 in IEEE Transactions on Emerging Topics in Computing
7 July 2025 in IEEE Access
This paper addresses the issue of double burst errors occurring in memories and presents the design of corresponding error correction codes (ECC). The proposed ECCs can correct up to two burst errors simultaneously, each up to 4-bit. The errors’ positions are randomly distributed across any bit within the codeword. The proposed coding scheme is designed with FUEC and syndrome-based decoding. Then the scheme is implemented in hardware with Verilog HDL, utilizing parallel decoding techniques to minimize the latency and parity bits’ number. Comparative evaluations on hardware overheads are conducted for ECCs with the correction capabilities of double burst errors. To minimize the hardware overhead associated with codes with high correction requirements, bit interleaving techniques are applied, further reducing codec area, power, and delay. The ECCs are proved to demonstrate excellent performance in correcting double burst errors, with optimized hardware efficiency.