The new molecularly imprinted polymer (MIP) membrane based on cassava starch—Fe3O4—was developed to detect acetaminophen and caffeine simultaneously with the differential pulse voltammetry (DPV) method. Cassava starch was reacted with sodium tripolyphosphate (STPP) as a crosslinking agent, while acetaminophen and caffeine were added as templates. The Fe3O4 nanoparticles in the composite were added to increase the sensor’s sensitivity. The experimental results show that the ratio between cassava starch:STPP:acetaminophen/caffeine in the mixture for MIP membranes influences the sensitivity of the sensor obtained. MIP membranes with the best sensitivity is produced at a mixture ratio of 2:2:1. The sensor performance is also affected by the pH of the solution and the type of buffer solution used. The sensor works very well at pH 2 in PB solution. Sensors produced from GCE modified with MIP membrane from cassava starch—Fe3O4 with acetaminophen and caffeine as templates have linear range concentrations, respectively, at 50–2000 µM and 50–900 µM. Sensor sensitivity was 0.5306 A/M against acetaminophen and 0.4314 A/M against caffeine with Limit of Detection (LoD), respectively, 16 and 23 µM. Sensor selectivity and sensitivity are better than those without MIP and can be applied for the determination of the content of acetaminophen in headache medicine, with an accuracy of 96–99% and with Relative Standard Deviation (RSD) 0.9–2.56%.
26 February 2024 in Journal of Nanoparticle Research
This study discusses the activation of natural zeolite from Blitar City – East Java using NaOH solution (0.5 M and 1.0 M). Characteristics of unactivated and activated zeolites were also investigated, as well as the effect of the activator (NaOH solution) on functional groups, element composition, pore size, specific surface area, and total pore volume. FTIR spectroscopy, XRF, and gas physisorption were conducted to support the study. Experimental data showed that: (1) the major functional groups were observed at 1250-780 cm-1 in the infrared spectra, in which the unactivated and the activated zeolite were not significantly different; (2) the elemental composition of zeolite (Si and Al) tended to decrease after the activation process; (3) the pore size of the activated zeolite increased while the surface area and total pore volume decreased. Based on this study, activated zeolite (AZB-1.0) showed the optimum result: the pore size increased by 4.12847 nm, and the total pore volume did not decrease significantly by 0.04987 cc/g.