15 January 2020 in IEEE Access
The coupled thermo-mechanical field analysis of three-dimensional (3D) stacked integrated circuits (ICs) is evaluated by an efficient and accurate simulation strategy that combines equivalent homogenization modeling methodology and sub-modeling technique. The thermal field is first investigated using the proposed approach, and based on which the structural field is also examined through the calculation of warpage. The utilization of sub-modeling method reveals the local temperature and warpage distributions, which is lost or ignored by the conventional homogenization method. To validate the proposed method, the simulation results of a five-layer stacked integrated circuits are compared against true 3D results of the detailed model, where the maximum deviation for temperature and warpage is as low as 1.62% and 4.89%, respectively, which are greatly improved compared to 8.23% and 7.83% using traditional homogenization method. In addition, the total computation time is reduced by 76.7% in contrast to true 3D finite element analysis (FEA) simulation. Furthermore, the impacts of through-silicon-via (TSV) geometries, underfill and μ -bump parameters on the temperature and warpage distributions are also studied to guide the design of 3D ICs with high performance and reliability.
20 December 2022 in IEEE Transactions on Electron Devices
Polymer liner has been used in through-silicon-vias (TSVs) for smaller parasitic capacitance and better thermo-mechanical performance. For the application in heterogeneous integrated systems, it is critical to study the thermal reliability of such TSVs in both theoretical modeling and experimental characterization. Among the numerous reliability challenges, the Cu protrusion phenomenon of TSVs is one of the most severe issues, which can lead to cracks and delamination in integrated systems. In this article, the annealing-induced Cu protrusion of polyimide (PI) liner TSVs is studied by experiments and simulations. PI-TSVs are fabricated and the Cu protrusion at various annealing conditions is characterized. Finite element analysis (FEA) is carefully carried out taking into account the diffusion creep rate model, and the deviations between FEA and experiment results of protrusion heights are less than 3%. Besides, the deformation procedure and the creep behavior of Cu pillars during annealing are analyzed. Based on the proposed FEA model, comprehensive parametric analyses are conducted to study the effects of different annealing conditions on the Cu protrusion heights, which are helpful to understand and improve the thermal reliability of PI-TSVs.