1 May 2016 in Renewable and Sustainable Energy Reviews
30 January 2020 in IEEE Access
Faults detection and analysis in PV system are considered critical for ensuring safety and increasing output power of PV arrays. PV faults do not only reduce output power and efficiency but also lessen the working life time of a system. Most common and chronic PV faults are line to line, line to ground, shadowing fault, and arc fault while less common and acute faults are hotspot, degradation, bypass diode, and connection faults. Event of PV fault detection failures, such as most recent in Mount Holly, USA in 2011 evinced the improvement in current fault detection and mitigation techniques to shrink such failures. There are various limitations in the existing fault detection techniques, as identified in this paper, which may cause misdetection of the faults. This paper is focused on mathematical formulation of various PV faults and lead to the latter’s critical analysis in terms of efficiency, accuracy, complexity, and reliability. The presented work also helps to identify nature and causes of occurrence of a PV fault. This research work serves as a special set of references and recommendations for researchers and PV manufacturing industry to improve fault detection prospects in solar PV systems.
1 March 2018 in Measurement
6 June 2022 in IEEE Access
In the recent past, the integration of distributed generation via power electronic interface like voltage source inverter (VSI) allows attaining the desired voltage quality by adopting appropriate control law. This paper presents sliding mode control (SMC) with composite reaching law technique for regulating output voltage under variable load conditions for single phase VSI. Inherent properties of SMC like robustness are achieved usually at the cost of chattering along the sliding surface. To handle this trade-off, optimal sliding surface selection mechanism is applied with adoptive reaching law based on state variables magnitude to set the value of control gain. The novelty of the proposed technique is related to composite reaching law that overcomes constraints associated with SMC. The proposed reaching law is a combination of exponential, power, and difference function. The intelligent mix of these functions makes the suggested reaching law more effective in achieving a high-speed convergence rate of system states and significant chattering reduction. Moreover, the sliding surface is chosen using a time-varying slope based on error variables. Comparative study of SMC with cosine exponential reaching law (Cos-ERL) results, fractional power rate reaching law (FPRRL) and proposed composite reaching law with rotating sliding surface(C-RL-RSS) applied on single phase voltage source inverter under variable load conditions validates the effectiveness of the proposed C-RL-RSS based SMC. It is revealed that the proposed C-RL-RSS based SMC is proficient in achieving very low %THD in the output voltage along with reduced chattering and minimum tracking time.
18 May 2023 in Journal of the Society for Cardiovascular Angiography & Interventions