Capacitive deionization (CDI) is considered a promising technology for desalination of sea or brackish water. In this study, a ZnS/g-C3N4 composite was synthesized through a one-step high-temperature method and used as the main material to fabricate CDI electrodes. The results of SEM and TEM showed that spherical-like nanoparticles of ZnS were uniformly distributed on the g-C3N4 sheet. The g-C3N4 phase facilitates the ZnS particles precipitate and restrain their agglomeration, which contributes to a high specific surface area of ZnS. Furthermore, the electrochemical test results indicated that ZnS/g-C3N4 composite had a good capacitance characteristic, low resistance, and high electrochemical stability. Finally, the desalinization performance of the ZnS/g-C3N4 composite electrodes was tested in traditional mode and membrane capacitive deionization (MCDI) mode. The results showed that ZnS/g-C3N4//ZnS/g-C3N4 (MCDI) exhibited an optimal desalination capacity. The adsorption amount was 27.65, 50.26, and 65.34 mg/g for NaCl initial concentration of 200, 400, and 600 mg/L, respectively, with the voltage of 1.2 V and flow rate of 5 mL/min. Increasing initial concentration enhanced the conductivity and ion migration rate so as to increase the NaCl adsorption amount. ZnS/g-C3N4 composite can be used as potential electrode material for high performance of MCDI.
Complete desorption of contaminants from electrode materials is required for the efficient utilization and long service life of capacitive deionization (CDI) but remains a major challenge. The electrodesorption capacity of CDI in the conventional electrode configuration is limited by the narrow electrochemical stability window of water, which lowers the operating potential to approximately 1.2 V. Here, we report a graphite anode–titanium cathode electrode configuration that extends the cathode potential to −1.7 V and provides an excellent (100%) electrodesorption performance, which is maintained after five cycles. The improvement of the cathode potential depends on the redox property of the electrode. The stronger the oxidizability of the anode and reducibility of the cathode, the wider the cathode potential. The complete desorption potential of SO42− predicted by theoretical electrochemistry was the foundation for optimizing the electrode configuration. The desorption efficiency of Cl− depended on the ionic strength and was negligibly affected by circulating velocities above 112 mL min−1. This work can direct the design optimizations of CDI devices, especially for reactors undergoing chemisorption during the electrosorption process.
1 January 2021 in Desalination and Water Treatment