Research on electromagnetic interference (EMI) of high frequency power converters remains a challenging and important topic, particularly in light of rapidly emerging wide bandgap power devices operating with ns level turn-on/turn-off times. Building on the substantial contributions that have been made on the formation mechanisms of common mode (CM) radiation, a new mechanism of equivalent CM driving voltage source caused by imbalanced conductors or components is proposed. Applying this mechanism, the CM driving voltage source model of a non-isolated Boost DC/DC power converter with input/output cables is introduced. The CM far field electric strength algorithms of an asymmetric cable antenna are theoretically analyzed and derived in detail. Subsequently, a prototype for a low-power 30 MHz very high frequency (VHF) Boost power converter based on gallium nitride (GaN) is built and its 10 m CM far field radiation strength is predicted according to the proposed model. The radiation pattern characteristics are analyzed and several radiation suppression methods are also designed. The comparison with the measured radiation results shows that the proposed CM radiation model and the prediction method achieve good effect below 300 MHz.
1 September 2022 in Chinese Journal of Electrical Engineering
In this paper, common mode (CM) and differential mode (DM) far-field radiation models of a typical digital inverter with cables are built up to predict electromagnetic field strength and analyze field characteristics. The CM current model and its analyses are based on the imbalance difference method. It is found out that the voltage between the drain and the source electrodes of upper transistor is the key equivalent source of electromagnetic interference (EMI). Far-field radiation strength of the digital inverter in free space is predicted by using the asymmetrical antenna radiation method and current loop radiation method. The accuracy of these methods is verified by the CST electromagnetic simulation results in the frequency range from 1 MHz to 400 MHz. Furthermore, the radiation models are improved by using the mirror method, which enables to include the reflection effect of the metal ground plane at the electromagnetic compatibility (EMC) test site. Both the results of measurements in a semi-anechoic chamber and the simulation results confirm the proposed electromagnetic radiation prediction method.
1 April 2021 in Journal of Physics: Conference Series
In this paper, we propose a hyper-redundant tensegrity bird-neck robotic mechanism. To study the inverse kinematics of this mechanism, we propose a method with two steps. Firstly, the backbone curve for the bird neck is used to describe the macroscopic shape of the mechanism. Secondly, by coordinating the internal forces of the cables when the bird-neck tensegrity model is in equilibrium, we can get all cable lengths of the bird neck at a certain shape which is the inverse kinematics solution. Simulations are conducted to verify the validity of the proposed inverse kinematics method.
In this paper, the advantages and disadvantages of the two traditional climbing methods are compared firstly. Then combing the linear relationship between the wind speed and the optimal speed and the two traditional climbing methods, an improved variable-step climbing method is proposed. After that a model of improved variable-step climbing method is established. Finally, the simulation is carried out by the proposed method, considering step wind and natural wind. The compared simulations results verify the proposed method has better characteristics.