High power and narrow vertical divergence lasers for the 980 nm wavelength range based on the photonic crystal (PC) structure are investigated. The structure of the PC layers and the position of the quantum well (QW) are optimized through mode analysis, which to maximize the output power of the PC laser. A broad area (BA) laser with $300~\mu $ m width and 4 mm cavity length yields 41.8 W output with far-field divergence angles of 16.5° in lateral and 16.8° in vertical at full width at half maximum (FWHM) under continuous-wave (CW) 48 A operating current at 5 °C.
Semiconductor lasers with surface high-order gratings have been fabricated and measured. $31^{\mathrm {st}}$ -order gratings were defined by the standard contact-type i-line photolithography near the front facet and subsequently etched into the ridges of the semiconductor lasers by the inductively coupled plasma. Both the static and dynamic characteristics were investigated. The threshold current and maximum output power are 22 mA and 12 mW, respectively. Side-mode suppression ratios are larger than 35 dB at bias currents except approximately 145 mA due to mode hopping. −3 dB bandwidth of the small signal response is 13.8 GHz at 130 mA. The eye diagram at a bit rate of 30 Gbps is clearly open.
6 October 2021 in IEEE Photonics Technology Letters
By simulating the dependence of laser directionality and the possibility of multimode lasing on the sidewall angle of Aquarius-shaped cavity, we achieved the optimized parameters for low-coherence and high-directivity laser output. The measured divergence angle, the speckle contrast, and the output power are 7.2°, 4.53 %, 700 mW@4 A, respectively, in the experiment. Then we introduced patterned electrode on the P-side of the laser, and obtained adjustable coherence with the switched speckle contrast between 4.8 % and 27.8 %. This highly directional and adjustable coherence on-chip complex cavity laser prospectively offers a new choice for biological imaging.