The impact of the composition of blends comprising low‐density polyethylene (LDPE), isotactic polypropylene (PP) and a styrenic copolymer additive on the thermomechanical properties as well as the direct‐current (DC) electrical and thermal conductivity is investigated. The presence of 5 weight percent (wt%) of the styrenic copolymer strongly reduces the amount of PP that is needed to enhance the storage modulus above the melting temperature of LDPE from 40 to 24 wt%. At the same time, the copolymer improves the consistency of the thermomechanical properties of the resulting ternary blends. While both the DC electrical and thermal conductivity strongly decrease with PP content, the addition of the styrenic copolymer appears to have little influence on either property. Evidently, PP in combination with small amounts of a styrenic copolymer not only allows to reinforce LDPE at elevated temperatures but also functions as an electrical conductivity‐reducing additive, which makes such thermoplastic ternary formulations possible candidates for the insulation of high‐voltage power cables.
28 April 2021 in ACS Applied Materials & Interfaces
Hydrogen (H2) sensors that can be produced en masse with cost-effective manufacturing tools are critical for enabling safety in the emerging hydrogen economy. The use of melt-processed nanocomposites in this context would allow the combination of the advantages of plasmonic hydrogen detection with polymer technology; an approach which is held back by the slow diffusion of H2 through the polymer matrix. Here, we show that the use of an amorphous fluorinated polymer, compounded with colloidal Pd nanoparticles prepared by highly scalable continuous flow synthesis, results in nanocomposites that display a high H2 diffusion coefficient in the order of 10–5 cm2 s–1. As a result, plasmonic optical hydrogen detection with melt-pressed fluorinated polymer nanocomposites is no longer limited by the diffusion of the H2 analyte to the Pd nanoparticle transducer elements, despite a thickness of up to 100 μm, thereby enabling response times as short as 2.5 s at 100 mbar (≡10 vol. %) H2. Evidently, plasmonic sensors with a fast response time can be fabricated with thick, melt-processed nanocomposites, which paves the way for a new generation of robust H2 sensors.
16 November 2026 in Journal of Applied Crystallography
Characterizing anisotropic nanostructures is essential for understanding the properties of advanced materials. Small-angle X-ray scattering tensor tomography is a scattering technique that enables spatially resolved characterization by reconstructing 3D reciprocal-space maps. Conventional analyses based on main scattering direction and degree of orientation offer limited insight into complex or multidirectional structural orientations. In this work, an algorithm is introduced that retrieves a quantitative orientation distribution function from small-angle X-ray scattering tensor tomography data, offering a probabilistic description of the nanostructure orientations. Spherical harmonics and the convolution theorem are used to decouple particle shape and size information from orientation information. The approach is demonstrated on a plasmonic composite of gold nanorods in a polymer matrix, revealing voxel-wise orientation distribution functions and identifying multidirectional features, beyond the reach of previous analysis tools. The method is best suited for axially symmetric samples with minimal impact of the structure factor. While the spherical harmonic representation lacks a positivity constraint, the method provides a reliable estimate of the orientation distribution, expanding the capabilities of small-angle X-ray scattering tensor tomography for investigating complex anisotropic materials.