20 October 2021 in Journal of Applied Crystallography
20 June 2025 in Advanced Science
Hard carbons show significant promise as anode materials for sodium‐ion batteries. However, monitoring the sodiation process in the hard carbon electrode during cycling and understanding the sodiation mechanism remain challenging. This article reports on operando 2D scanning small‐ and wide‐angle X‐ray scattering (SWAXS) and ex situ 3D SAXS tomography of hard carbon electrodes during the sodiation process. Structural changes are monitored with spatial and temporal resolution during the electrochemical process and shows that sodiation through micropore filling is the more dominating mechanism in the later stages of sodiation, i.e. in the plateau region of the voltage profile, while intercalation occurs continuously. Spatial inhomogeneities are resolved over the electrode and reveal an increased level of inhomogeneity at higher degree of sodiation with regions of different degrees of micropore filling. Resolving the processes spatially shows that plating starts at the interface between the electrode and the current collector where also a high degree of micropore filling and formation of pseudo‐metallic sodium is found. The work demonstrates how SWAXS imaging can contribute to understanding the sodiation of hard carbon anodes, not only by spatially resolved analysis, but as a method to decouple contributions from different components in a cell, enabling more accurate scattering analysis in in situ environments.
21 March 2024 in Journal of Applied Crystallography
Dark-field X-ray microscopy (DFXM) is a full-field imaging technique that non-destructively maps the structure and local strain inside deeply embedded crystalline elements in three dimensions. In DFXM, an objective lens is placed along the diffracted beam to generate a magnified projection image of the local diffracted volume. This work explores contrast methods and optimizes the DFXM setup specifically for the case of mapping dislocations. Forward projections of detector images are generated using two complementary simulation tools based on geometrical optics and wavefront propagation, respectively. Weak and strong beam contrast and the mapping of strain components are studied. The feasibility of observing dislocations in a wall is elucidated as a function of the distance between neighbouring dislocations and the spatial resolution. Dislocation studies should be feasible with energy band widths of 10−2, of relevance for fourth-generation synchrotron and X-ray free-electron laser sources.
27 June 2024 in Journal of Applied Crystallography
Small-angle X-ray tensor tomography and the related wide-angle X-ray tensor tomography are X-ray imaging techniques that tomographically reconstruct the anisotropic scattering density of extended samples. In previous studies, these methods have been used to image samples where the scattering density depends slowly on the direction of scattering, typically modeling the directionality, i.e. the texture, with a spherical harmonics expansion up until order ℓ = 8 or lower. This study investigates the performance of several established algorithms from small-angle X-ray tensor tomography on samples with a faster variation as a function of scattering direction and compares their expected and achieved performance. The various algorithms are tested using wide-angle scattering data from an as-drawn steel wire with known texture to establish the viability of the tensor tomography approach for such samples and to compare the performance of existing algorithms.
1 February 2022 in Journal of Applied Crystallography
13 January 2022 in Optics Express
Dark-field x-ray microscopy (DFXM) is an x-ray imaging technique for mapping three-dimensional (3D) lattice strain and rotation in bulk crystalline materials. At present, these maps of local structural distortions are derived from the raw intensity images using an incoherent analysis framework. In this work, we describe a coherent, Fourier ptychographic approach that requires little change in terms of instrumentation and acquisition strategy, and may be implemented on existing DFXM instruments. We demonstrate the method experimentally and are able to achieve quantitative phase reconstructions of thin film samples and maps of the aberrations in the objective lens. The method holds particular promise for the characterization of crystalline materials containing weak structural contrast.