16 November 2023 in Smart Materials and Structures
A novel single-mode miniature standing wave ultrasonic motor (SUSM) is proposed. The SUSM uses the first extension vibration mode and second extension vibration mode of the stator to generate different diagonal vibration trajectories and drive the rotor to rotate in different directions through a single-phase signal. The bidirectional motion of the SUSM can be realised by switching the two vibration modes and excitation methods. The motor is designed and the operating principle is analysed. The resonant frequencies of the two vibration modes are determined by the finite element simulated analysis, and the transient analysis is adopted to obtain the diagonal trajectories of the driving part. Finally, a prototype of the single-mode SUSM is developed and the mechanical performance of the prototype is measured and evaluated. According to the experimental results, the motor has a no-load speed of 265.37 rpm (B1 mode) and 320.20 rpm (B2 mode) in each direction under 200 Vp−p and 100 Vp−p voltage excitation, and the maximum load is 60 mN and 70 mN, respectively.
18 March 2024 in IEEE Transactions on Industrial Electronics
To simultaneously meet the requirements of precision instruments for both high speed and high resolution, this study proposes a cross-band piezoelectric screw motor capable of operating simultaneously in the static, quasi-static, and resonant states. The motor is capable of exhibiting different motion characteristics under different working modes. In the static state, high-precision positioning of the motor is achieved by applying direct current to piezo-stacks. In the quasi-static state, low-speed and high-resolution movements of the motor are achieved by providing piezo-stacks with a sawtooth wave signal. In the resonant state, high-speed motion of the motor is realized by giving piezo-stacks sinusoidal signals to excite the stator to resonate. Theoretical and finite element models are established for analysis and simulation. A prototype is manufactured, assembled and tested. Experiment results show that in the static state, the prototype achieves a resolution of 0.5 nm. In the quasi-static state, with a sawtooth wave excitation of 1000 Hz and 400 Vpp, the prototype achieves a velocity of 19.58 $\mu$ m/s, a load of 650 g and a resolution of 0.93 nm. In the resonant state, with sinusoidal signals excitation of 10.4 kHz and 150 Vpp, the prototype reaches a velocity of 8.5 mm/s and a load of 3600 g.
1 June 2023 in Review of Scientific Instruments
A resonant screw-driven piezoelectric motor operating in single-mode vibrations is proposed, designed, manufactured, and studied. The motor is constructed with a stator and a threaded rotor. The stator consists of a hollow parallelogram metal elastomer and two piezoelectric ceramic plates. The motor is excited by a single-phase signal to produce two separate vibration modes: the first expansion mode (B1 mode) and the second expansion mode (B2 mode). Each mode drives the threaded rotor in one direction, and the bidirectional motion is achieved by switching the two modes. The construction is designed, and modal simulation is performed using finite element software to determine the structural parameters. A frequency-domain analysis is performed to obtain the frequency response characteristics, and the motion trajectories of the stator are obtained using transient analysis. Finally, a prototype is produced, and experiments are conducted. Experimental results indicate that the no-load speeds of the motor under the 200 Vp-p voltage excitation are 1.67 and 1.04 mm/s in the two modes, which correspond to maximum loads of 35 and 20 mN, respectively.