26 September 2016 in Journal of Zhejiang University-SCIENCE A
A high-performance concrete (HPC) is required to have superior performance in various aspects such as workability, strength, durability, dimensional stabil
26 May 2016 in American Journal of Civil Engineering
Traditionally, the use of limestone fines (LF) in concrete is to replace either part of the cement or part of the fine aggregate, notwithstanding this, the authors are advocating that the LF should be better used as cement paste replacement, which is expected to improve the durability and sustainability of concrete at the same time. To verify this new strategy of using LF, 9 nos. concrete mixes of the same powder paste volume ratio and variable LF contents and W/C ratios were produced for permeability and strength measurement. The results proved that the strategy of using LF to partially replace cement paste could effectively decrease the permeability and increase the strength at the same W/C ratio. Furthermore, even when the W/C ratio is allowed to slightly increase while keeping the concrete at the same strength, the permeability can also be significantly reduced for better durability by using LF as cement paste replacement.
17 October 2016 in International Journal of Materials Science and Applications
The heat generated during the curing period of concrete may results in early thermal cracking. To avoid or at least alleviate this early thermal cracking problem, replacing part of cement by cementitious materials should be an effective method. Herein, it is proposed to add PFA or CSF as cement replacement to lower the cement content and heat generated from the hydration of cement. To study the effectiveness of adding PFA or CSF in reducing the heat generation of curing concrete, a series of concrete mixes with water/cement ratios ranging from 0.24 to 0.40 and different amounts of PFA or CSF added were tested for their heat generation. The results illustrated that the addition of PFA or CSF as cement replacement could effectively reduce the adiabatic temperature rise and heat generation of curing concrete, while the addition of CSF is much more effectively than addition of PFA in reducing heat generation at the same strength.