Lars Nielsen

Lars Nielsen

Auto-generated profile, based on publicly available information

Lars Nielsen

Aarhus University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2022 in Optics Letters
Verified
Journal Article
Closed access
PDF file
RKRakesh Ranjan Kumar
Rakesh Ranjan Kumar
AHAndreas Hänsel
Andreas Hänsel
MBMónica Far Brusatori
Mónica Far Brusatori
LNLars Nielsen
Lars Nielsen
LALuc Augustin
Luc Augustin
MHMartijn J. R. Heck
Martijn J. R. Heck
We report a monolithically integrated coupled extended-cavity distributed Bragg reflector laser with, to our knowledge, the lowest reported intrinsic linewidth of ∼10 kHz, which is extracted from a corresponding frequency-noise level of ∼3200 Hz2/Hz, realized on an InP generic foundry platform. Using the delayed self-heterodyne method, the experimentally measured linewidth was 45 kHz. The laser has an on-chip optical output power of 18 mW around 1550 nm at an injection current of 95 mA. The laser operates in a single-mode regime with a side-mode suppression ratio of 54 dB. Our monolithic approach paves the way toward further integration, such as integrated quantum key distribution transceivers.

18 March 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
LNLars Nielsen
Lars Nielsen
Martijn HeckMartijn Heck
Martijn Heck
Coupled opto-electronic oscillators can generate microwave signals with very low phase noise. Several approaches for modelling these oscillators exist, but none of them include the fast carrier dynamics of the mode-locked laser, due to computational limitations. In this work, we present a new model, that is based on a computationally efficient model for semiconductor mode-locked lasers, which is capable of simulating both the fast laser dynamics and the long term phase stability. We use it to model the phase noise of a hybridly integrated coupled opto-electronic oscillator. The results show that a timing jitter of down to ≈ 0.2 ps in the integration range from 10 kHz to 10 MHz is achievable when using an integrated delay line of 10.2 m in the opto-electronic feedback path. It is also shown that by increasing both gain and bandwidth of the opto-electronic feedback link, the timing jitter is reduced. Together, these results present a path towards low phase noise performance of hybridly integrated coupled opto-electronic oscillators, and the model serves as a new design tool. Such oscillators might increase, for example, the spectral efficiency in future data communication systems and thus enable higher data rates.

10 October 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
FRFabian Ruf
Fabian Ruf
LNLars Nielsen
Lars Nielsen
NVNicolas Volet
Nicolas Volet
MHMartijn J. R. Heck
Martijn J. R. Heck
Fast and ultra-low loss single-photon switching and routing are essential for photonic quantum computation and communication. To address this need in a scalable fashion, all-optical switches that can be fabricated in an ultra-low loss and mature Si $_{3}$ N $_{4}$ photonic integrated circuit (PIC) foundry platform are designed and optimized for sub-ns switching times suitable for deterministic quantum-dot single-photon sources. The working principle relies on cross-phase modulation (XPM) of the single photons with a 1550-nm pump pulse and is enhanced by a ring resonator. Two different designs of the primary switch element are theoretically studied, namely a ring resonator intensity switch (RRIS) based on resonance shifting due to XPM and a ring resonator phase switch (RRPS) acting as an all-optical phase shifter in a Mach–Zehnder interferometer. As a novel approach to speed up the switching, chirped pre-emphasis and wipe sections for the pump pulses are utilized. A design tool is established from analytical expressions and serves as starting point for further optimization using a dedicated travelling-wave model (TWM). The TWM demonstrates the feasibility of both designs to be driven by either the proposed pre-emphasis pulse shape or a train of chirped Gaussian pulses. While the RRPS turns out to require less pump energy, its operation is more sensitive to pump-power fluctuations. Insertion losses below 0.1 dB and a power consumption below 5 nJ at 1 GHz switching rates for both configurations prove the potential of this concept for scalable quantum photonic applications.

18 May 2022 in Optics Letters
Verified
Journal Article
Closed access
PDF file
MBMónica Far Brusatori
Mónica Far Brusatori
DDDaniel N. Duplat
Daniel N. Duplat
IDIterio Degli-Eredi
Iterio Degli-Eredi
LNLars Nielsen
Lars Nielsen
PTPeter L. Tønning
Peter L. Tønning
MHMartijn J. R. Heck
Martijn J. R. Heck
Two photonic integrated circuits (PICs) are coupled to form a hybridly integrated semiconductor ring laser in the telecom C band with an intrinsic linewidth of (158±21) Hz. This is, to the best of our knowledge, the first time an InP active–passive platform is used in conjunction with an integrated low-loss resonator to obtain a narrow-linewidth laser implemented using generic foundry platforms. The presented results pave the way for a hybrid integrated platform for microwave photonics (MWP), as the demonstrated device includes multiple active–passive components, and its narrow optical linewidth can potentially be translated to a narrow-linewidth microwave signal. Furthermore, as the laser is based on hybrid integration of two PICs from generic foundry platforms, there is a path to reproducible and low-cost devices.

29 August 2018 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
LNLars Nielsen
Lars Nielsen
EBErwin A. J. M. Bente
Erwin A. J. M. Bente
EHErik Den Haan
Erik Den Haan
Martijn HeckMartijn Heck
Martijn Heck
The lack of integrated optical isolators in standard integrated semiconductor photonics platforms leaves integrated lasers vulnerable to back reflections. A hypothesis is that by making a ring laser operate unidirectionally, external reflections will couple back into the non-lasing direction, and the sensitivity toward reflections will be reduced. In this paper, unidirectionality is pursued by placing two saturable absorbers asymmetrically in a ring mode-locked laser. In the case of passive mode-locking, and for internal reflections below -75 dB, simulations, based on the slowly varying envelope approximation, show extinction ratios of up to 37 dB between the two propagation directions. For larger reflections, the extinction ratio degrades linearly with reflection magnitude. The extinction ratio is shown to increase when the reverse bias of the saturable absorbers is modulated actively with a phase difference. Our simulations show that unidirectional operation reduces the amplitude noise in the frequency range from 1 MHz to 10 GHz from around 0.022% to 0.004% when compared to bidirectional operation, whereas the timing jitter of the pulse train increases from around 172 to 412 fs. Experiments show that the extinction ratio of a realization of this mode-locked laser design is limited to around 3 dB. Simulations suggest that this is due to internal butt-joint reflections in the laser cavity.

12 February 2021 in Optics Letters
Verified
Journal Article
Closed access
PDF file
LNLars Nielsen
Lars Nielsen
MHMartijn J. R. Heck
Martijn J. R. Heck
Wavelength division multiplexing (WDM) systems can utilize the full capacity of a single optical fiber and thereby keep up with the increasing demand for higher bandwidths within datacenters. A single mode-locked laser diode emits a comb of wavelengths and can thus, in principle, be used to generate all the channels of a WDM system. However, achieving a large channel spacing of much more than 20–30 GHz can be troublesome, since this depends directly on making the cavity smaller. To circumvent this, harmonic mode-locking can be utilized, as this increases the channel spacing while keeping the cavity size fixed. In this work, we show that a monolithically integrated 45-GHz harmonically mode-locked ring laser based on an intra-cavity Mach–Zehnder filter is feasible on a generic integration platform. True harmonic mode-locking was achieved with no measurable RF peak at the fundamental frequency. The pulse train exhibits an autocorrelation trace width of ∼ 2.5 p s FWHM, RF linewidth of ∼ 0.44 M H z , and 3-dB comb bandwidth of ∼ 240 G H z .