8 April 2022 in Physical Review Accelerators and Beams
In order to optimize the design of undulators using high-temperature superconductor (HTS) bulks we have developed a method to estimate the critical current density () of each bulk from the overall measured magnetic field of an undulator. The vertical magnetic field was measured along the electron-beam axis in a HTS bulk-based undulator consisting of twenty Gd-Ba-Cu-O (GdBCO) bulks inserted in a 12-T solenoid. The values of the bulks were estimated by an inverse analysis approach in which the magnetic field was calculated by the forward simulation of the shielding currents in each HTS bulk with a given . Subsequently the values were iteratively updated using the precalculated response matrix of the undulator magnetic field to . We demonstrate that it is possible to determine the of each HTS bulk with sufficient accuracy for practical application within around 10 iterations. The precalculated response matrix, created in advance, enables the inverse analysis to be performed within a practically short time, on the order of several hours. The measurement error, which destroys the uniqueness of the solution, was investigated and the points to be noted for future magnetic field measurements were clarified. The results show that this inverse-analysis method allows the estimation of the of each bulk comprising an HTS bulk undulator.
10 October 2024 in Physical Review Accelerators and Beams
The magnetic field optimization of RE-Ba-Cu-O (REBCO, RE = rare earth) bulk superconducting undulators is a fundamental step toward their implementation in an accelerator driven photon source, like a synchrotron or a free electron laser. In this article, we propose a sorting algorithm to reduce the undulator’s phase error based on the reconstruction of the trapped current inside the bulks of a staggered array undulator. The results obtained with a YBCO short prototype field-cooled down to 10 K in a 10 T magnetic field are reported. Finally, its performance is critically discussed in light of 2D magnetic field maps of its individual components, obtained at LN 2 after the magnetization tests. Published by the American Physical Society 2024
1 February 2023 in Journal of Synchrotron Radiation
The Paul Scherrer Institute is implementing laser-based seeding in the soft X-ray beamline (Athos) of its free-electron laser, SwissFEL, to enhance the temporal and spectral properties of the delivered photon pulses. This technique requires, among other components, two identical modulators for coupling the electron beam with an external laser with a wavelength range between 260 and 1600 nm. The design, magnetic measurements results, alignment, operation and also details of the novel and exotic magnetic configuration of the prototype are described.