21 August 2019 in Journal of Materials Chemistry A
Low electrical conductivity and sluggish charge storage kinetics are the key issues of orthorhombic niobium pentoxide (T-Nb2O5) for sodium-ion batteries. Here, we report on an approach for improving the electrochemical properties of T-Nb2O5 using fluorine substitution and carbon modification strategies. The obtained orthorhombic niobium oxyfluoride/carbon nanobelt composite (T-Nb2O5−xFy⊂C-NBs) displayed significantly improved electrochemical properties with sodium ion storage capacity as high as 292 mA h g−1 at 0.05 A g−1, along with an excellent cycling stability over 10 000 cycles at 1 A g−1 (0.002% capacity decay per cycle) as measured using a half cell. An intercalation-pseudocapacitance mechanism (1.0–3.0 V vs. Na/Na+) for storing sodium ions was observed in T-Nb2O5−xFy⊂C-NBs, along with a conversion reaction mechanism (<0.2 V vs. Na/Na+), leading to an improved energy storage performance and faster kinetics. Density functional theory calculations revealed that the fluorine-substituted niobium oxyfluoride possesses energetically more favourable sodiation sites and lower diffusion barriers compared to the pristine T-Nb2O5. Characterisation results confirmed that the self-assembled T-Nb2O5−xFy⊂C-NBs exhibit a hierarchical nanoarchitecture with T-Nb2O5−xFy nanoslabs uniformly embedded in a carbon nanobelt matrix to form arrays, enabling excellent electron conductivity and electron/ion transport, as well as structural stability against cycling. Benefitting from both the compositional and structural advantages of the T-Nb2O5−xFy⊂C-NBs composite, a sodium-ion capacitor fabricated with T-Nb2O5−xFy⊂C-NBs as the anode and a commercial activated carbon as the cathode delivered energy densities of 86.8 and 32.1 W h kg−1 at power densities of ∼250 and 18 000 W kg−1, respectively.
18 December 2017 in Sustainable Energy & Fuels
Thermal decomposition of Ni(acac)2 leads to in situ formation of NiO sandwiched between expanded graphite oxide layers, and this material displays good electrocapacitive properties.
5 January 2023 in International Journal of Hydrogen Energy
4 June 2019 in Sustainable Energy & Fuels
We report a composite electrode material consisting of reduced graphene oxide (RGO) and carbon fibers (CFs) prepared by liquid-phase impregnation of cellulose paper in an RGO suspension, followed by freeze drying and activation. The composite electrode exhibited an excellent electrocapacitive performance in aqueous electrolytes. The electron-conductive carbon fibers derived from the carbonization of cellulose paper and the RGO nanosheets supported on the carbon fibers are favorable for charge storage and transport. Measured using a three-electrode system, the composite electrode delivered an area-normalized capacitance of 30 μF cm−2 at a current density of 1 A g−1 in a 6 M KOH electrolyte. A flexible solid-state electrochemical capacitor cell fabricated using the composite as both electrodes and polyvinyl alcohol–H2SO4 gel as the electrolyte delivered an areal capacitance of 49 mF cm−2 at 2 mV s−1. The effective surface area, the carbon nanostructure and the pores in such a composite all contribute to the high surface area-normalized capacitance.
18 June 2025 in IEEE Transactions on Instrumentation and Measurement
Due to the limitation of industrial conditions in production, raw sensor data are always shown as an unbalanced dataset, characterized by abundant normal operational data and scarce fault instances. This unbalance can degrade the performance of conventional fault diagnosis methods, leading to reduced accuracy and unstable model training. To address this challenge in bearing fault diagnosis, this paper proposes a Multi-Fault Feature Wasserstein Generative Adversarial Network (MFF-WGAN) to enhance diagnostic precision. First, the framework employs a multi-encoder denoising autoencoder architecture to mitigate noise interference in raw sensor data. Subsequently, the proposed MFF-WGAN integrates label information into its adversarial loss function to enable simultaneous generation of diverse fault categories, while incorporating inter-class feature discrepancies to refine sample quality. Finally, the developed multi-fault feature Wasserstein generation adversarial network is tested on the Case Western Reserve University bearing dataset and the laboratory bearing dataset. Computational results show that the proposed method can generate high-quality bearing samples with multiple faults effectively, which can obtain a higher diagnosis accuracy of 99.01% and 97.71% compared with the existing methods.