CuO/ZnO/ZrO2 catalyst systems were synthesized in different ways and comprehensively characterized in order to study synthesis-to-property relations. A series of catalyst samples was prepared by coprecipitation, one-pot synthesis, and wet impregnation. The coprecipitation of multicomponent precipitates is usually a preliminary stage for preparation of mixed oxide catalysts. Cetyltrimethylammonium bromide (CTAB) was used in the surfactant-supported coprecipitation to improve the structural or textural characteristics of the catalytic samples. In the one-pot synthesis, all necessary components are simultaneously converted by evaporation from solutions into solids. During the wet impregnation, zirconium hydroxide is loaded with metal salts. After thermal treatment, all samples formed pure metal oxide forms, which was confirmed by XRD. The specific surface area of the investigated samples and their porous texture were determined by nitrogen adsorption. The reducibility of metal oxides and the kind of CuO phase was characterized by temperature-programmed reduction (TPR), and the surface acid properties by temperature-programmed ammonia desorption (TPAD). The CuO/ZnO/ZrO2 sample with the highest amount of strong acid sites is characterized by the formation of large CuO particles combined with the worst reducibility so that potentially catalytic active Cu/CuO pairs can be formed. One catalyst system was further characterized by in situ diffuse reflection Fourier transform infrared spectroscopy (DRIFTS) to identify surface intermediate species, which may occur during the conversion of CO2/H2 to methanol.
The demand for 1,3-butadiene, one of the most important raw materials in the rubber industry, is constantly increasing. The Lebedev process is a classical method of producing 1,3-butadiene from ethanol, which is to be optimized with regard to the mixed oxide catalysts used. In this work, the binary MgO/SiO2 solid system was tested with regard to its optimum chemical composition for the catalytic conversion of ethanol to 1,3-butadiene. Furthermore, novel mesoporous mixed oxides were prepared to investigate their textural, structural, and surface chemical properties as well as the catalytic activity. Nitrogen physisorption, scanning electron microscopy (SEM), and temperature-programmed ammonia desorption (NH3-TPD) measurements were carried out and evaluated. It was shown that the optimum yield of 1,3-butadiene is achieved by using MgO/SiO2 mixed oxide catalysts with 85–95 mol% MgO and not, as suggested by Lebedev, with 75 mol% MgO. The NH3-TPD measurements revealed that the maximum acid-site density is achieved with an equimolar up to magnesium-rich composition. During the synthesis of binary MgO/SiO2 solid systems based on mesoporous MgO, a thermally stable and ordered structure was formed in the autoclave, depending on the carbonate used and on the duration of the treatment.
The acidic properties of a selected SiO 2 –Al 2 O 3 support material have been modified by steam-treating to study the influence on the formation of active nickel sites for butene oligomerization.
Nickel modified mixed-phase catalysts containing both mesoporous Al-MCM-41 and microporous ZSM-5 phases were synthesized via a one-pot synthesis. By varying the composition of the catalysts, optimum values regarding Si/Al ratio and nickel content for a highly selective dimerization of n-butenes were identified. An interaction of nickel sites with vicinal aluminum or acid sites can be assumed, since a correlation between Ni/(Al + Ni) ratio, catalytic activity and selectivity was found. Novel approaches to evaluate the contribution of the cationic or coordinative reaction mechanism to the overall reaction course are proposed.
Water vapor sorption in salt hydrates is a promising method to realize seasonal solar heat storage. Several of these materials have already shown promising performance for this application. However, a significant bottle neck for applications is the low thermal conductivity. In this study, several fabrication methods of the fixation of salts and their hydrates on metals to overcome the problem are presented. The products are analyzed concerning the hydration states, the corrosion behavior, the chemical compatibility, and the mechanical stability.