Shuohan Cheng

Shuohan Cheng

Auto-generated profile, based on publicly available information

Shuohan Cheng

Department of Space Microwave Remote Sensing System, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2022 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
Yonghua CaiYonghua Cai
Yonghua Cai
Yunkai DengYunkai Deng
Yunkai Deng
HZHeng Zhang
Heng Zhang
Robert WangRobert Wang
Robert Wang
WYWu Yulun
Wu Yulun
SCShuohan Cheng
Shuohan Cheng
In an azimuth multichannel synthetic aperture radar (SAR) system, the unavoidable channel error will result in virtual targets or azimuth ambiguity, which significantly degrades the quality of high-resolution and wide-swath (HRWS) SAR image. Calibration of the imbalances between channels has been an important topic. First, to present the channel error effect on the final image clearly, a precise relation between the amplitudes of virtual targets and amplitude–phase error is established by matrix trace, which applies to the case of a certain amplitude–phase error. In addition, the total amplitude of all targets represented by the ${L^{1}}$ -norm reaches the minimum when there is no channel error. Based on this principle, an image-domain least ${L^{1}}$ -norm method is proposed to estimate the phase error between channels. By utilizing the focused high signal-to-noise ratio (SNR) images, the proposed algorithm achieves high estimation accuracy. Moreover, no redundant channel is required in the proposed algorithm compared with the subspace-based method. Finally, the effectiveness of the proposed channel error effect analysis and calibration method is validated by both the simulated and real SAR data.

11 November 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
SCShuohan Cheng
Shuohan Cheng
XSXilong Sun
Xilong Sun
Yonghua CaiYonghua Cai
Yonghua Cai
HZHuifang Zheng
Huifang Zheng
WYWeidong Yu
Weidong Yu
SCSheng Chang
Sheng Chang
The azimuth multichannel synthetic aperture radar (SAR) increases the swath width by reducing the pulse repetition frequency (PRF), thus providing an effective scheme for realizing high-resolution and wide-swath (HRWS) imaging simultaneously. However, the quality of multichannel SAR images will suffer from electromagnetic jamming in the electronic antagonism environment. The existing channel cancellation methods not only require high positioning accuracy of the jammer and high PRF of the SAR system, but also remain periodic dark stripes, which reduce the readability of the SAR images. To solve these problems, this article proposes a scheme for multichannel SAR to locate the barrage jammer and suppress jamming signals. Firstly, by establishing the least ${{\bm {L}}^{1}}$ -norm optimization model on the echoes after channel cancellation, the location of the jammer in both azimuth and range directions can be accurately estimated. Then, based on the estimated jammer position, a joint cancellation filter is constructed to remove the jamming signal from the contaminated multichannel SAR data. And the reconstruction filter is designed according to the characteristics of the remaining signal, so that the SAR system reduces the requirement for high PRF. Finally, for the case of dark strips, this paper calculates the image amplitude equalization coefficient by deducing the azimuth modulation function, and a uniform HRWS SAR image without jamming is acquired. Results of simulated and measured data validate that the proposed method can effectively remove jamming signals and obtain the HRWS SAR images.

7 August 2023 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
SCShuohan Cheng
Shuohan Cheng
HZHuifang Zheng
Huifang Zheng
WYWeidong Yu
Weidong Yu
ZLZongsen Lv
Zongsen Lv
ZCZhen Chen
Zhen Chen
TQTianyu Qiu
Tianyu Qiu
Elevation multichannel synthetic aperture radar (SAR) utilizes digital beamforming (DBF) technology to achieve high-resolution and wide-swath (HRWS) imaging. However, electromagnetic jamming sometimes occurs in SAR images, resulting in the loss of scene information. A DBF-SAR system is weak in resisting jamming signals, and the barrage jamming signals within an imaging swath are not easy to remove using traditional suppression methods for DBF-SAR. Thus, an advanced barrage jamming suppression scheme based on elevation multichannel cancellation is proposed. First, the jamming signals in the echoes are removed using a well-designed channel cancellation filter to obtain the jamming-free signals. In accordance with the characteristics of jamming-free signals, the weighting coefficients are rededuced, and a modified DBF method is presented to achieve HRWS imaging and improve the DBF-SAR signal-to-noise ratio (SNR). In this way, the proposed scheme can effectively eliminate barrage jamming signals. In addition, some simulations and a 16-channel airborne DBF-SAR experiment were executed to demonstrate the proposed scheme.

26 August 2024 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
TQTianyu Qiu
Tianyu Qiu
YZYi Zhang
Yi Zhang
SCShuohan Cheng
Shuohan Cheng
HZHuifang Zheng
Huifang Zheng
HZHaonan Zhao
Haonan Zhao
Jamming for synthetic aperture radar plays a important role in electronic countermeasures. Currently, there are many jamming methods, but each method has its own issues. Barrage jamming has the drawbacks of requiring high power and being easy to detect, while deceptive jamming faces issues such as inadequate real-time performance and the need for multiple parameters estimated with high precision. An intra-pulse modulation jamming scheme with a novel jamming effect is proposed to ameliorate these issues. Firstly, in the sidelobe, jamming parameters and optimal jamming weights are calculated by estimated parameters combined with the backscattering coefficient of the region of interest (ROI). Secondly, based on the jamming parameters, multiple intra-pulse modulations are simultaneously applied to the received ROI echo. Then the modulated signals are transmitted with corresponding optimal weighting power and superimposed with the original echo, leading to the damage of the ROI imaging results. Finally, the utilization of relatively low-power Gaussian noise for suppression resulted in complete covering of the target in the ROI. This scheme improves the real-time performance of generating jamming signals and significantly reduces the power required for noise for suppression. It analyzed that even in the presence of forwarding power errors and inadequate real-time performance, there will still be a significant jamming effect. Results of simulations and measured data validate that the proposed scheme can effectively destroy image information.

5 March 2024 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
SCShuohan Cheng
Shuohan Cheng
ZLZongsen Lv
Zongsen Lv
HZHuifang Zheng
Huifang Zheng
WYWeidong Yu
Weidong Yu
TQTianyu Qiu
Tianyu Qiu
Synthetic Aperture Radar (SAR) is easily affected by various radio frequency interference (RFI), which leads to the degradation of image quality. In multi-channel SAR, the position of the RFI source is a prerequisite for most spatial filtering methods to remove interference. For dual-channel SAR systems, the existing RFI source localization methods can only obtain the position of a single jammer, while in a complex electromagnetic environment, there may be multiple RFI sources. To address this problem, a multisource RFI localization method for dual-channel SAR is proposed in this letter. First, the time-frequency analysis is employed to establish the feature mapping of RFI and SAR signals in the time-frequency domain. Then, ridge path detection and recombination algorithms are proposed to separate and extract the received interference signals. Finally, the least L 1 -norm models are established for each extracted interference signal based on the phase difference of the two channels, and the high precision azimuth position of the RFI sources can be obtained using the interior point method. Simulations indicate that the azimuth localization accuracy of the proposed method can be within 20 m when the Signal-to-Interference Ratio (SIR) is below 0dB. The spaceborne SAR data acquired by Chinese Gaofen-3 (GF-3) also verify the effectiveness of the proposed method.