9 June 2020 in IEEE Communications Magazine
Future generations of optical networks will require optical interfaces that operate beyond 1 Tb/s to keep up with the exploding worldwide Internet data capacity. The data converters, digital- to-analog converter (DAC) and analog-to-digital converter (ADC), significantly define the signal bandwidth that can be transmitted or received with an electro-optic transceiver. The foreseen improvements of complementary metal oxide semiconductor (CMOS) data converters in upcoming CMOS technology nodes do not scale to the expected interface data rates for future communications systems. To address this bandwidth requirement, parallel data converter architectures (i.e., interleaved data converters) are an intriguing solution to enable performance beyond the limits imposed by continuing traditional CMOS approaches. In this article, we discuss the performance requirements for future data converters and provide an overview of the projected evolution of fiber optic networks and the limits imposed by CMOS-only data converters. Interleaved data converter architectures, in both the electrical and optical domains, are described and discussed. Finally, an outlook is given on the future development of next generation DAC and ADC architectures. This article is based on the presentations and discussions in the workshop "Super DACs and ADCs -- To Interleave or Not to Interleave" at the Optical Networking and Communication Conference 2019.
29 March 2021 in Journal of Lightwave Technology
We present a concept for networked optical wireless communications, also denoted as LiFi, to meet the requirements of industrial wireless applications. These are primarily mobility support with moderate data rates per device, reliable real-time communication, and integrated positioning. We describe a distributed multiuser multiple-input multiple-output architecture, serving mobile devices via an optical wireless infrastructure. The system consists of a central unit, being connected to a number of distributed optical frontends covering a larger area. Our main contribution is a medium access control protocol based on space division multiple access. Evaluation results demonstrate the advantages of joint transmission from adjacent optical frontends and the dynamic switching between spatial diversity and multiplexing. The relevance of spatial multiplexing becomes obvious through channel measurements in an indoor scenario. Moreover, we highlight a low-power physical layer based on on-off-keying for battery-powered mobile devices. Our architecture can easily integrate positioning by simultaneously measuring the time-of-flight between multiple optical frontends and the mobile device. We highlight the use of plastic optical fiber as an analog fronthaul technology and discuss the integration with other networks. The main functions described in this paper will be supported by the upcoming IEEE Std 802.15.13.
6 March 2018 in Optics Express
Digital-to-analog converters (DACs) for high-speed optical communication systems based on CMOS technology have bandwidths lower than nowadays electro-optic components. A promising concept to circumvent this bottleneck is the frequency-interleaved DAC (FI-DAC) concept. In this paper, experimental results for the application of a 180 GS/s FI-DAC with 40 GHz analog bandwidth based on two DACs in a high-speed optical link are discussed and compared with simulation results. Thereby, phase and power mismatches, spectral overlap, clipping and the required DAC resolution are investigated. Signal-to-noise ratio (SNR) estimations based on a discrete multi-tone (DMT) signal show the influence of the individual analog components on the signal quality.