15 February 2024 in Physical Review B
We propose an electrostatically coupled phononic metamaterial for angular velocity sensing, whose sensitivity is immune to external damping and local material defects; furthermore, the coupling strength and frequency range of bands are tunable by the voltages applied to the lattices. The induced Coriolis force could open up the topologically nontrivial band gaps, and the edge band bandwidths increase gradually with respect to the angular velocity. Hence, according to the dispersion relation of edge modes and the difference between edge states and bulk states, an angular velocity sensing method based on the band structure variation of the tunable phononic metamaterial is proposed by using the phase difference and amplitude ratio of edge states. In contrast to traditional amplitude-dependent microelectromechanical system gyroscopes, such a frequency-dependent angular velocity sensing method makes the sensitivity independent of the external damping coefficient. In addition, the topological properties ensure the robustness of the proposed angular velocity sensing method against local defects. The tunable metamaterial-based angular velocity sensing mechanism provides a bridge between physics and engineering applications.
14 May 2025 in Sensors and Actuators A: Physical
24 June 2024 in Journal of Microelectromechanical Systems
The snap through phenomenon of curved beam structures offers the possibility for designing high-performance filters, however, superharmonic resonances outside the filter’s passband are difficult to be attenuated. Therefore, a two-stage bandpass filter incorporating two electromagnetically coupled curved microbeams is designed, which possesses excellent specifications of sharp switching in the stopband and flat bandwidth compared to single curved-beam based filter. The reduced-order model considering the nonlinear electromagnetic forces and geometric nonlinearities is established, and discretized using the Galerkin method. Then, the resulting static and dynamic reduced order models are numerically solved. Extensive numerical simulation results show that the improved filter has a rectangular coefficient close to 1.0, a passband ripple of 0.2 dB, and a bandwidth ratio of 14.8%, which drastically reduces the stopband interference to 10% of the passband signal. Finally, the effects of DC voltage, AC voltage and coupling strength on the center frequency and bandwidth are parametrically investigated, where the center frequency can be tuned between 23.81 kHz and 25.16 kHz and the bandwidth covers the frequency range from 22.46 kHz to 26.05 kHz.2024-0054
31 January 2025 in Physical Review Applied
5 December 2025 in IEEE Sensors Journal
The fully decoupled configuration integrating high-aspect-ratio flexible beams and proof masses is a widely adopted design in Microelectromechanical System (MEMS) vibratory gyroscopes. However, such structures are extremely sensitive to microfabrication errors, particularly beam width deviations. To address this issue, this paper proposes a high-order nonlinear dynamic modeling method and a robust optimization strategy for fully decoupled MEMS gyroscopes, explicitly accounting for microfabrication errors. Nonlinear stiffness expressions are derived for double-folded beams, V-shaped coupling beams, and composite beams, and a high-order dynamic model is established incorporating both geometric and electrostatic nonlinearities. Theoretical natural frequencies agree well with finite element simulations, with deviations below 3.3%. Assuming all beam width deviations are normally distributed, the direct probability integration method (DPIM) is used to quantify gyroscope performance uncertainties in mechanical sensitivity and quadrature output. Robust optimization is conducted using beam structural parameters and drive voltage as design variables, aiming to improve sensitivity while minimizing deviations in sensitivity and quadrature output. The optimized gyroscope structure demonstrates strong robustness against beam width deviations, achieving a 3.75 times improvement in sensitivity and a 31% reduction in quadrature output. The 1σ standard deviation of sensitivity and quadrature output is significantly reduced by 78.1% and 40.2%, respectively, effectively suppressing the impact of fabrication errors on device performance.