Jaejoong Jeong

Jaejoong Jeong

Auto-generated profile, based on publicly available information

Jaejoong Jeong

School of Electrical Engineering, KAIST, Daejeon, Republic of Korea

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 September 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JCJun Hong Chu
Jun Hong Chu
SKSheung Hun Kim
Sheung Hun Kim
CKChangyeon Kang
Changyeon Kang
ESEui Joong Shin
Eui Joong Shin
JJJaejoong Jeong
Jaejoong Jeong
BCByung Jin Cho
Byung Jin Cho
Dual mechanism memory, which combines charge trapping and polarization switching, was demonstrated as a way to overcome the limited memory window of charge trap flash (CTF) memory. However, due to the poor thermal stability of the Hf y Zr 1-y O (HZO) film, the dual mechanism memory scheme cannot be integrated into the current 3D V-NAND flash device fabrication process where the poly-silicon channel is deposited and annealed after the HZO blocking layer is deposited. In this study, Hf x Al 1-x O (HAO) is investigated as the blocking layer due to its superior thermal stability. The dual mechanism memory with HAO blocking layer has achieved a 47% larger memory window compared to the device with HZO blocking layer. It is also demonstrated that the expanded memory window of the dual mechanism memory with HAO enables quad-level cell operation (QLC) with 1 V spacing between each state.

3 June 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
HLHyeongrak Lim
Hyeongrak Lim
SKSeong Kwang Kim
Seong Kwang Kim
SLSeung Woo Lee
Seung Woo Lee
YPYoungkeun Park
Youngkeun Park
JJJaejoong Jeong
Jaejoong Jeong
SangHyeon KimSangHyeon Kim
SangHyeon Kim
In this work, we first demonstrated heterogeneous 3-D (H3D) sequential complementary field-effect transistors (seqCFETs) highlighting biaxially compressively strained Ge (sGe) (100) channel, which potentially solves a critical bottleneck in CFET development: high mobility top strained p-channel limited by the difficulty of SiGe stressor growth. Leveraging high-quality heteroepitaxial growth and direct wafer bonding (DWB), we achieved ~0.6% biaxially compressively sGe on a 6-in Si wafer by growing Ge virtual substrate, Si0.5Ge0.5 stressor/etch stopper, and sGe channel layer. Finally, we first demonstrated the H3D seqCFET with biaxially compressively sGe (100) p-channel MOSFETs, featuring good voltage transfer curve (VTC) characteristics with high voltage gain (Vgain) of 51 V/V at supply voltage (VDD) = 1.25 V. We believe that the sGe channel realized by the method shown in this work will be a very promising technology to realize high-performance vertically 3-D stacked CFET in the future.

11 March 2025 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YPYoungkeun Park
Youngkeun Park
JJJaejoong Jeong
Jaejoong Jeong
SNSemin Noh
Semin Noh
DKDongbin Kim
Dongbin Kim
HKHeetae Kim
Heetae Kim
BCByung Jin Cho
Byung Jin Cho
In this study, we propose an approach to relieve the mechanical stress in the gate stack of top-tier devices during the monolithic 3D (M3D) integration process. In the M3D process, selective laser annealing process has been actively adopted for the fabrication of top-tier devices in order to avoid possible adverse effects on pre-existing bottom-tier devices. However, the perpendicular irradiation direction during the laser annealing generates a vertical thermal gradient across the gate stack of top-tier MOS devices, resulting in unavoidable mechanical stress that is detrimental to device performance. In this work, we have demonstrated that inserting an Al2O3 layer in between the TiN gate electrode and the HfO2 gate dielectric can reduce the mechanical stress in the gate stack. This approach can reduce the residual mechanical stress in the gate stack by approximately 67%, resulting in a ~ 49% reduction in interface state density (Dit) and a ~ 20% improvement in carrier mobility.

26 August 2025 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JJJaejoong Jeong
Jaejoong Jeong
KYKim Yeeun
Kim Yeeun
YPYoungkeun Park
Youngkeun Park
JPJong Kyung Park
Jong Kyung Park
BCByung Jin Cho
Byung Jin Cho
A novel memory device structure, called backside ferroelectric-assisted charge trap flash (BF-CTF), has been proposed. The ferroelectric layer at the backside of the polysilicon channel can be polarized by the front gate voltage due to the speed difference between polarization and the inversion layer generation. The backside polarization can modulate the body potential and make additional threshold voltage (Vth) shift, providing additional memory window. The BF-CTF device exhibits significantly improved memory performance such as increased memory window, reduced program/erase time, and improved charge retention. More importantly, the BF-CTF device does not suffer from read disturbance problems originated from the minor loop of ferroelectric, as the ferroelectric polarization is decoupled from the read operation.

5 December 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YPYoungkeun Park
Youngkeun Park
HLHyeongrak Lim
Hyeongrak Lim
JJJaejoong Jeong
Jaejoong Jeong
JKJoon Pyo Kim
Joon Pyo Kim
JBJongsu Baek
Jongsu Baek
BCByung Jin Cho
Byung Jin Cho
Nanosecond annealing using a pulsed green laser is proposed to activate the source/drain of top-tier p-channel metal-oxide-semiconductor field-effect transistors (pMOSFETs) while avoiding the degradation of preexisting bottom-tier devices. Localized high temperatures generated by green laser annealing (GLA) in the top-tier layer improve crystallinity and increase the activated boron concentration in the source/drain of top-tier pMOSFETs compared to conventional rapid thermal annealing (RTA). These improvements result in a reduction of sheet resistance ( ${R}_{\text {sh}}\text {)}$ and specific contact resistivity ( $\rho _{\text {c}}\text {)}$ , thereby increasing the effective mobility ( $\mu _{\text {eff}}\text {)}$ of the top-tier Ge pMOSFETs by approximately 46%. As a result, heterogeneous 3-D sequential CFETs integrated using GLA achieve a high voltage gain ( ${V}_{\text {gain}}\text {)}$ of 68 V/V.

6 February 2026 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JJJaejoong Jeong
Jaejoong Jeong
KYKim Yeeun
Kim Yeeun
YPYoungkeun Park
Youngkeun Park
YKYeong Kwon Kim
Yeong Kwon Kim
BJByung Chul Jang
Byung Chul Jang
BCByung Jin Cho
Byung Jin Cho
We propose a novel and-type memory array featuring a backside ferroelectric field-effect transistor (BF-FET). This architecture places the ferroelectric layer on the backside of a thin polysilicon channel. A key novelty lies in connecting all ferroelectric layers to a common back gate (BG), which eliminates the need for an additional word line (W/L) to control the BG bias, thereby substantially reducing design complexity. Furthermore, the BF-FET exhibits inherent immunity to read disturbance originating from the minor loop of ferroelectric materials, as its polarization switching is completely decoupled from the read operation. The BF-FET demonstrates a three times larger memory window than Fe-FETs with the same thickness of the ferroelectric and channel layers, enabling robust multilevel cell (MLC) operation. The convolutional neural network (CNN) simulation demonstrates that the BF-FET-based synaptic array exhibits superior endurance, with its recognition rate remaining above 95% even after $10^7$ repeated read cycles.