9 August 2021 in RSC Advances
Silicon carbide (SiC) is a hard-to-machine material due to its high hardness and chemical stability, and usually an essential step in chemical mechanical polishing (CMP) is to modify the SiC surface without introducing damage or other elements, then to polish the modified surface. For high quality and high efficiency surface modification of SiC, a green and promising oxidation approach named plasma electrochemical oxidation (PECO) is proposed. Experiments were conducted to investigate the oxidation mechanism of PECO to enable its application for CMP. The oxidized surface was detected by scanning electron microscope (SEM) and atomic force microscopy (AFM), many atomic-scale protuberances were confirmed to be introduced in the PECO process. Through the analysis of energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS), it is proved that the SiC surface has been oxidized into SiO2 and a transition layer (silicon oxycarbide) is formed between SiO2 and SiC. Based on the analysis of the cross section image of the oxidized layer, electrolyte–SiC interface chemical reaction and oxidation layer formation mechanism are illustrated to explain the oxidation mechanism. Silicon dioxide growth process model is proposed and illustrated that the phrase of protuberances growth change from charge transfer to diffusion. The present work offers an alternative approach to modify SiC surface, and provides a reference for chemical and mechanical synergetic effect applied in CMP.
21 November 2024 in Journal of Materials Research and Technology
21 August 2025 in Transportation Research Record: Journal of the Transportation Research Board
In the context of the increasing need for structural health monitoring of public railroad bridges, vehicle loads, as a crucial influencing factor, could be assessed through bridge weigh-in-motion (BWIM) to quantitatively manage their impact on bridge service life. However, most existing assessments focus primarily on straight bridges and tracks, with relatively few studies addressing horizontal curved bridges. This limitation stems from the complex bend–twist coupling characteristics of curved bridges, which complicate deformation and vibration analyses. To address the challenge of predicting moving external loads on horizontal curved bridges, an approach combining the Moses algorithm with a wheel load distribution algorithm was proposed to estimate the weight of each wheel in this paper. To obtain a clear signal as each wheel passes through the measurement point, the strain–time curve was extracted by wavelet transform, and the relevant signals were identified. This enabled the measurement of key vehicle parameters, including the number of axles, vehicle speed, and axle spacing. The results demonstrate that the relative errors between the actual and theoretical values for gross vehicle weight and axle weight are 12.96% and 16.86%, and the relative errors of axle spacing and speed are 9.83% and 1.6%. Notably, the smaller curvature of the curved beam contributes to the smaller difference between the inner and outer wheel loads measured by BWIM.