Yibo Li

Yibo Li

Auto-generated profile, based on publicly available information

Yibo Li

College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYibo Li
Yibo Li
CZCai Zhichao
Cai Zhichao
LCLan Chen
Lan Chen
During the service process, the thickness of the sheet metal is unevenly changed due to uneven pressure or abrasion. The inner and outer surfaces are in two nonparallel planes, which causes the reflection path of the ultrasonic wave inside the specimen to shift and brings a challenge to electromagnetic ultrasonic thickness measurement. In this work, we used the detection scheme of electromagnetic acoustic resonance (EMAR) combined with the multiplication of n- times compression (MNC) data processing to detect the thickness of the sloped specimens through a fixed-point rotating racetrack coil. A power spectral density (PSD) analysis is performed on the spectrum signals obtained under different rotation angles $\alpha $ to achieve the judgment of the inclination direction of the specimen. The simulation results show that the measured thickness increases with the increase of the inclined angle $\theta $ of the specimen. Within a certain range, the change in the width of the racetrack coil will not have a significant influence on the thickness measurement results of the sloped specimen. The PSD of the resonance signal increases first and then decreases with the increase of the rotation angle $\alpha $ , and the PSD reaches its peak when $\alpha $ is 90°. Experimental results show that when the coil rotation angle $\alpha $ is between 50° and 70°, the scheme can accurately measure the thickness of the sloped specimen, and the direction perpendicular to the rotation angle of the maximum PSD is the inclination direction of the sloped specimen.

27 February 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
CZCai Zhichao
Cai Zhichao
ZLZhengshi Lu
Zhengshi Lu
YLYibo Li
Yibo Li
LZLei Zhang
Lei Zhang
This study introduces three non-destructive techniques for measuring coating thickness and bonding quality, critical in coating research. These techniques are Nonlinear Electromagnetic Acoustic Resonance (NEMAR), Nonlinear Electromagnetic Ultrasound Sweeping Frequency (NEMUSF), and Flip Accumulation Nonlinear Single Electromagnetic Ultrasound Sweeping Frequency (FANSEMUSF). All use electromagnetic acoustic transducers (EMATs) to generate ultrasound waves with different amplitudes, which shift the resonance frequency of coated specimens. This shift helps determine the nonlinear coefficient α, indicating coating thickness and bonding quality. These methods are non-contact, preventing damage to the coated specimen. The effectiveness of these techniques was proven on various coated specimens. NEMAR’s second harmonic echo signal enhances its usability. NEMUSF offers robust α measurement without requiring sweeping and filtering equipment. FANSEMUSF’s simplicity, needing only a single excitation, makes it suitable for industrial applications. The quantification of the contributions of coating thickness and bonding quality to the nonlinear coefficient was not performed in this study, which could be a potential avenue for future research.

7 July 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYibo Li
Yibo Li
PWPing Wang
Ping Wang
Gui-Yun TianGui-Yun Tian
Gui-Yun Tian
XLXin Li
Xin Li
YYYuan Yang
Yuan Yang
Existing techniques for measuring longitudinal stress in rails are primarily limited to the shallow surface area of the rail head, hindering accurate assessment of the overall stress state across the rail’s cross-section. To overcome this limitation, this study presents a novel methodology for rail stress measurement based on electromagnetic ultrasonic birefringence. This method utilizes an electromagnetic acoustic transducer (EMAT) to generate two types of shear waves with polarization directions parallel and perpendicular to the stress direction, which propagate through the entire rail cross-section. By calibrating the acoustoelastic birefringence of these shear waves, a model for longitudinal stress measurement was established, and its performance was quantitatively analyzed using the probability of detection (POD). Test results indicate a strong linear relationship between acoustoelastic birefringence and longitudinal compressive stress in the rail. The absolute errors of stress measurements for all rails are within 3.60 MPa. The key POD parameters (a50 and a90/95) for CHN60, CHN50, and CHN43 rails are -3.11/-7.46 MPa, -3.56/-9.79 MPa, and -5.31/-10.93 MPa, respectively. These data demonstrate that the electromagnetic ultrasonic birefringence stress measurement method provides high measurement accuracy for rail longitudinal stress, offering valuable insights for developing rail stress measurement equipment.