Yuan Yang

Dr. Yuan Yang

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
SHSheng Hongwei
Sheng Hongwei
PWPing Wang
Ping Wang
YYYuan Yang
Yuan Yang
CTChenglong Tang
Chenglong Tang
Both microstructure and stress affect the structure and kinematic properties of magnetic domains. In fact, microstructural and stress variations often coexist. However, the coupling of microstructure and stress on magnetic domains is seldom considered in the evaluation of microstructural characteristics. In this investigation, Magnetic incremental permeability (MIP) and magnetic Barkhausen noise (MBN) techniques are used to study the coupling effect of characteristic microstructure and stress on the reversible and irreversible motions of magnetic domains, and the quantitative relationship between microstructure and magnetic domain characteristics is established. Considering the coupling effect of microstructure and stress on magnetic domains, a patterned characterization method of microstructure and stress is innovatively proposed. Pattern recognition based on the Multi-layer Perceptron (MLP) model is realized for microstructure and stress with an accuracy rate higher than 97%. The results show that the pattern recognition accuracy of magnetic domain features and micro-magnetic features simultaneously as input parameters is higher than that of micro-magnetic features alone as input parameters.

17 September 2023 in Ultrasonics
Verified
Journal Article
Closed access
YYYuan Yang
Yuan Yang
PWPing Wang
Ping Wang
YJYinliang Jia
Yinliang Jia
LJLixuan Jing
Lixuan Jing
YSYu Shi
Yu Shi
XLXin Li
Xin Li

16 September 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YYYuan Yang
Yuan Yang
PWPing Wang
Ping Wang
TSTian-Lang Song
Tian-Lang Song
YJYi Jiang
Yi Jiang
WZWen-Tao Zhou
Wen-Tao Zhou
WXWei-Lei Xu
Wei-Lei Xu
A method based on the high-frequency ultrasonic guided waves (UGWs) of a piezoelectric sensor array is proposed to monitor the depth of transverse cracks in rail bottoms. Selecting high-frequency UGWs with a center frequency of 350 kHz can enable the monitoring of cracks with a depth of 3.3 mm. The method of arranging piezoelectric sensor arrays on the upper surface and side of the rail bottom is simulated and analyzed, which allows the comprehensive monitoring of transverse cracks at different depths in the rail bottom. The multi-value domain features of the UGW signals are further extracted, and a back propagation neural network (BPNN) is used to establish the evaluation model of the transverse crack depth for the rail bottom. The optimal evaluation model of multi-path combination is reconstructed with the minimum value of the root mean square error (RMSE) as the evaluation standard. After testing and comparison, it was found that each metric of the reconstructed model is significantly better than each individual path; the RMSE is reduced to 0.3762; the coefficient of determination R2 reached 0.9932; the number of individual evaluation values with a relative error of less than 10% and 5% accounted for 100% and 87.50% of the total number of evaluations, respectively.

7 July 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYibo Li
Yibo Li
PWPing Wang
Ping Wang
Gui-Yun TianGui-Yun Tian
Gui-Yun Tian
XLXin Li
Xin Li
YYYuan Yang
Yuan Yang
Existing techniques for measuring longitudinal stress in rails are primarily limited to the shallow surface area of the rail head, hindering accurate assessment of the overall stress state across the rail’s cross-section. To overcome this limitation, this study presents a novel methodology for rail stress measurement based on electromagnetic ultrasonic birefringence. This method utilizes an electromagnetic acoustic transducer (EMAT) to generate two types of shear waves with polarization directions parallel and perpendicular to the stress direction, which propagate through the entire rail cross-section. By calibrating the acoustoelastic birefringence of these shear waves, a model for longitudinal stress measurement was established, and its performance was quantitatively analyzed using the probability of detection (POD). Test results indicate a strong linear relationship between acoustoelastic birefringence and longitudinal compressive stress in the rail. The absolute errors of stress measurements for all rails are within 3.60 MPa. The key POD parameters (a50 and a90/95) for CHN60, CHN50, and CHN43 rails are -3.11/-7.46 MPa, -3.56/-9.79 MPa, and -5.31/-10.93 MPa, respectively. These data demonstrate that the electromagnetic ultrasonic birefringence stress measurement method provides high measurement accuracy for rail longitudinal stress, offering valuable insights for developing rail stress measurement equipment.