25 October 2001 in Journal of Geophysical Research
The Mars Orbiter Laser Altimeter (MOLA), an instrument on the Mars Global Surveyor spacecraft, has measured the topography, surface roughness, and 1.064‐μm reflectivity of Mars and the heights of volatile and dust clouds. This paper discusses the function of the MOLA instrument and the acquisition, processing, and correction of observations to produce global data sets. The altimeter measurements have been converted to both gridded and spherical harmonic models for the topography and shape of Mars that have vertical and radial accuracies of ∼1 m with respect to the planet's center of mass. The current global topographic grid has a resolution of 1/64° in latitude × 1/32° in longitude (1×2 km2at the equator). Reconstruction of the locations of incident laser pulses on the Martian surface appears to be at the 100‐m spatial accuracy level and results in 2 orders of magnitude improvement in the global geodetic grid of Mars. Global maps of optical pulse width indicative of 100‐m‐scale surface roughness and 1.064‐μm reflectivity with an accuracy of 5% have also been obtained.
10 August 2004 in Journal of Geophysical Research
25 February 2005 in Science
Mars was most active during its first billion years. The core, mantle, and crust formed within â¼50 million years of solar system formation. A magnetic dynamo in a convecting fluid core magnetized the crust, and the global field shielded a more massive early atmosphere against solar wind stripping. The Tharsis province became a focus for volcanism, deformation, and outgassing of water and carbon dioxide in quantities possibly sufficient to induce episodes of climate warming. Surficial and near-surface water contributed to regionally extensive erosion, sediment transport, and chemical alteration. Deep hydrothermal circulation accelerated crustal cooling, preserved variations in crustal thickness, and modified patterns of crustal magnetization.
31 December 2002 in Journal of Geophysical Research
From gravity and topography data collected by the Mars Global Surveyor spacecraft we calculate gravity/topography admittances and correlations in the spectral domain and compare them to those predicted from models of lithospheric flexure. On the basis of these comparisons we estimate the thickness of the Martian elastic lithosphere (Te) required to support the observed topographic load since the time of loading. We convert Te to estimates of heat flux and thermal gradient in the lithosphere through a consideration of the response of an elastic/plastic shell. In regions of high topography on Mars (e.g., the Tharsis rise and associated shield volcanoes), the mass‐sheet (small‐amplitude) approximation for the calculation of gravity from topography is inadequate. A correction that accounts for finite‐amplitude topography tends to increase the amplitude of the predicted gravity signal at spacecraft altitudes. Proper implementation of this correction requires the use of radii from the center of mass (collectively known as the planetary “shape”) in lieu of “topography” referenced to a gravitational equipotential. Anomalously dense surface layers or buried excess masses are not required to explain the observed admittances for the Tharsis Montes or Olympus Mons volcanoes when this correction is applied. Derived Te values generally decrease with increasing age of the lithospheric load, in a manner consistent with a rapid decline of mantle heat flux during the Noachian and more modest rates of decline during subsequent epochs.
12 June 2014 in Journal of Geophysical Research: Planets
The Gravity Recovery and Interior Laboratory (GRAIL) mission has sampled lunar gravity with unprecedented accuracy and resolution. The lunar GM, the product of the gravitational constant G and the mass M, is very well determined. However, uncertainties in the mass and mean density, 3345.56 ± 0.40 kg/m3, are limited by the accuracy of G. Values of the spherical harmonic degree‐2 gravity coefficients J2 and C22, as well as the Love number k2 describing lunar degree‐2 elastic response to tidal forces, come from two independent analyses of the 3 month GRAIL Primary Mission data at the Jet Propulsion Laboratory and the Goddard Space Flight Center. The two k2 determinations, with uncertainties of ~1%, differ by 1%; the average value is 0.02416 ± 0.00022 at a 1 month period with reference radius R = 1738 km. Lunar laser ranging (LLR) data analysis determines (C − A)/B and (B − A)/C, where A < B < C are the principal moments of inertia; the flattening of the fluid outer core; the dissipation at its solid boundaries; and the monthly tidal dissipation Q = 37.5 ± 4. The moment of inertia computation combines the GRAIL‐determined J2 and C22 with LLR‐derived (C − A)/B and (B − A)/C. The normalized mean moment of inertia of the solid Moon is Is/MR2 = 0.392728 ± 0.000012. Matching the density, moment, and Love number, calculated models have a fluid outer core with radius of 200–380 km, a solid inner core with radius of 0–280 km and mass fraction of 0–1%, and a deep mantle zone of low seismic shear velocity. The mass fraction of the combined inner and outer core is ≤1.5%.