9 December 2024 in Heliyon
The natural serpentine from Skardu, Pakistan, has been incorporated with magnetite (Fe3O4) to form a nanocomposite using a chemical co-precipitation method for the removal of methylene blue (MB) dye. Various techniques such as Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), and Vibrating Sample Magnetometer (VSM) have been employed for the characterization. It was found that the composite exhibits sheet-like morphologies, Mg- and Si-rich surfaces, a surface area of 20.8 m2/g, and magnetic properties. The adsorption study showed that the Freundlich isotherm and pseudo-second-order kinetics best described the process with the nanocomposite achieving a 98 % MB removal efficiency, outperforming the pure serpentine. These results highlight the potential of serpentine/Fe3O4 nanocomposite as an effective, cost-efficient adsorbent for wastewater treatment applications.
30 October 2020 in Journal of Welding and Joining
In this study, the Taguchi Design of Experiment method was used to determine the optimal Friction Stir Welding (FSW) parameters for improving the mechanical properties of AA 2014-T6 alloy butt joints. The three most significant parameters-tool rotational speed, tool linear travel speed and tool tilt angle-were optimized using the L9 orthogonal array design. The optimal welding parameters for the maximum tensile strength were determined by analyzing the signal-to-noise (S/N) ratio. A regression model was developed for the desired responses. The optimal tensile strength was achieved at the 1000 rpm, rotational speed, 600 mm/rev welding speed, and 2 ° tool title angle. The results were confirmed using a steady-state heat transfer model generated from the COMSOL Multiphysics Finite Element software. The identified optimal conditions were verified by experimental validation tests. The experimental results were consistent with the predicted values. Analysis of variance (ANOVA) was conducted to determine the effects of individual parameters and to identify the most significant process parameter. ANOVA indicated that the most significant factor affecting the mechanical behavior of the joint was the tool rotation speed followed by the linear travel speed.
1 January 2025 in Advances in Mechanical and Materials Engineering
In this study, the Cu-0.78Cr-0.18Zr alloy was investigated for microstructural features in as-forged, aged and double aged conditions. This alloy was characterized by optical emission spectroscopy (OES), optical microscopy (OM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Formation of various phases and their morphology was studied using field emission scanning electron microscope (FE-SEM). Experimental results showed that the alloy in forged condition exhibited grain sizes ranging from 7.5-82 µm, with an average grain size of 33.05 µm. In aged condition, it mainly composed of four types of phases i.e. Cu-matrix, Zr rich (Cu-Zr) precipitates, Cr rich (Pure Cr and Cr-Cu) precipitates and Cu-Cr-Zr ternary precipitates. In single aged condition, Cu5CrZr precipitates were spotted with ellipsoidal morphology. Tiny pure Cr precipitates always showed spherical shape while Cr-rich precipitates appeared in spherical and ellipsoidal shape in single aged condition, while in double aged condition, in addition to these forms it also displayed elongated morphology. Zr rich precipitates always formed with nodular morphology.