Olena Naumyk

Olena Naumyk

Auto-generated profile, based on publicly available information

Olena Naumyk

National University “Zaporizhzhia Polytechnic”, Zaporizhzhia, Ukraine

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2025 in Casting Processes
Verified
Journal Article
Open access
ZOZaporizhzhya Machine-Building Plant Named After V.I. Omelchenko
Zaporizhzhya Machine-Building Plant Named After V.I. Omelchenko
DTDmytro Tomkin
Dmytro Tomkin
OPOleksii Pedash
Oleksii Pedash
JSJoint Stock Company «Motor Sich»
Joint Stock Company «Motor Sich»
ONOlena Naumyk
Olena Naumyk
NVNaumyk Valeriy
Naumyk Valeriy
The effect of reduced carbon content (0.015...0.020 % С) and, accordingly, the carbide phase on the properties of ЖС3ДК-ВІ alloy with additional alloying and modification with niobium, hafnium-nickel and nickel-yttrium alloys was investigated. It was established that in the structure of test samples with reduced carbon content, carbides are practically absent, and grain boundaries are very thin. When niobium, yttrium and hafnium are introduced, carbides are formed in the form of globular particles mostly uniformly distributed in the volume of the metal. The microstructure of samples with reduced carbon content is coarsely crystalline, which is probably due to the absence of competitive phase growth during melt crystallization. Experimental variants with low carbon content have impact toughness values at the level of 90...150 J/cm2, but extremely low long-term strength, probably due to the lack of carbide strengthening in the alloy. High impact toughness values are associated with the uniform distribution of the finely dispersed carbonitride phase in the structure. Complex modified (Nb+Hf+Y) samples, with a carbon content of 0.06%, showed sufficient impact toughness and long-term strength, which significantly exceeded the requirements of OST 1.90126-85. In these samples, the almost complete absence of large carbides in the bulk of the main γ-solid solution grains and the presence of small carbides of the Me23C6 type, which were released during heat treatment along the grain boundaries, prevented grain boundary slippage under conditions of high temperatures and applied load. The level of impact toughness, in this case, is provided by the release and uniform distribution of discrete and globular carbides and carbonitrides (approximately 2...3 µm in size) during the treatment of the melt with yttrium and hafnium. The decrease in impact strength, compared to low-carbon options, is probably due to the release of double carbides of font morphology. Досліджено вплив зниженого вмісту вуглецю (0,015…0,020 % С) та, відповідно, карбідної фази на властивості сплаву ЖС3ДК-ВІ з додатковим легуванням та модифікуванням ніобієм, лігатурами гафній-нікель та нікель-ітрій. Встановлено, що у структурі дослідних зразків зі зниженим вмістом вуглецю карбіди практично відсутні, а межі зерен дуже тонкі. При введенні ніобію, ітрію та гафнію відбувається утворення карбідів у формі глобулярних частинок, в основному рівномірно розподілених в об’ємі металу. Мікроструктура зразків зі зниженим вмістом вуглецю крупно кристалічна, що, ймовірно, зумовлено відсутністю конкурентного фазового росту при кристалізації розплаву. Дослідні варіанти з низьким вмістом вуглецю мають значення ударної в’язкості на рівні 90…150 Дж/см2, але вкрай низьку тривалу міцність, мабуть, через відсутність карбідного зміцнення у сплаві. Високі показники ударної в’язкості пов’язані з рівномірним розподілом у структурі дрібнодисперсної карбонітридної фази. Комплексно модифіковані (Nb+Hf+Y) зразки із вмістом вуглецю 0,06 %, показали достатню ударну в’язкість і тривалу міцність, що значно перевищувало вимоги ОСТ 1.90126-85. У цих зразках практично повністю відсутні великі карбіди в об’ємі зерен основного γ-твердого розчину і наявні дрібні карбіди типу Ме23С6, що виділилися в процесі термічної обробки по межах зерен, перешкоджали зернограничному прослизанню в умовах високих температур і прикладеного навантаження. Рівень ударної в’язкості в даному випадку забезпечується виділенням і рівномірним розподілом дискретних і глобулярних карбідів та карбонітридів (розміром приблизно 2...3 мкм) при обробці розплаву ітрієм і гафнієм. Зниження ударної в’язкості, порівняно з варіантами з низьким вмістом вуглецю, ймовірно, пов’язане з виділенням подвійних карбідів шрифтової морфології.

6 November 2025 in Materials Science
Verified
Journal Article
Closed access
PDF file
DTD. O. Tomkin
D. O. Tomkin
OPO. O. Pedash
O. O. Pedash
ONO. O. Naumyk
O. O. Naumyk
NVNaumyk Valeriy
Naumyk Valeriy

25 February 2024 in Casting Processes
Verified
Journal Article
Open access
«O«Motor Sich» (Zaporizhzhia Zaporizhzhia Machine-Building Plant Named After V.I. Omelchenko
«Motor Sich» (Zaporizhzhia Zaporizhzhia Machine-Building Plant Named After V.I. Omelchenko
DTD. Tomkin
D. Tomkin
SDS. Danilov
S. Danilov
OPO. Pedash
O. Pedash
ONO. Naumyk
O. Naumyk
NVNaumyk Valeriy
Naumyk Valeriy
The influence of the Сr+W+Mo, Ti+Al values and yttrium modification of the condition return on the mechanical properties and long-term strength of the ЖС6У-ВІ alloy was studied. It was established that the method of ЖС6У-ВІ alloy melt refining affects the separation of phases along the grain boundaries and allows an increase in the content of the γ’-phase, as a result of which it is possible to consider the admissibility of increasing the value of the Ti + Al sum, probably up to 8.3%. Refreshing the condition return during remelting allows you to control the chemical composition of the metal. To optimize the refreshing of the alloy, remelting must be carried out in an installation equipped with a sampling module to determine the chemical composition of the alloy during melting. Modification of the nickel-yttrium alloy with estimated 0.01% yttrium content in the metal makes it possible to ensure the absence of phase separation along the grain boundaries, reduces the grain size of the macrostructure. The modification increases the mechanical properties at room temperature, but reduces the long-term strength of the ЖС6У-ВІ alloy at high temperatures, which is a consequence of the reduction of the macrograin size. Досліджено вплив значення сум Сr+W+Mo, Ti+Al та модифікування ітрієм кондиційного во- роття на механічні властивості й тривалу міцність сплаву ЖС6У-ВІ. Встановлено, що спосіб рафінування розплаву сплаву ЖС6У-ВІ впливає на виділення фаз по межах зерен і допускає підвищення вмісту γ’-фази, внаслідок чого можна розглядати припустимість збільшення значення суми Ti+Al, ймовірно до 8,3 %. Освіження кондиційного вороття металу під час про- ведення переплаву дозволяє керувати хімічним складом металу. Для оптимізації освіження вороття сплаву, переплав необхідно проводити в установці, що обладнана модулем відбору проб для визначення хімічного складу сплаву під час ведення плавки. Модифікування сплаву нікель-ітрієвою лігатурою на розрахунковий вміст 0,01 % ітрію в металі дозволяє забез- печити відсутність виділень фаз по межах зерен, зменшує розмір зерен макроструктури. Модифікування підвищує механічні властивості при кімнатній температурі, але знижує тривалу міцність сплаву ЖС6У-ВІ при підвищених температурах, що є наслідком зменшення розміру макрозерна.

14 February 2025
Verified
Book Chapter
Closed access
PDF file
DTDmytro Tomkin
Dmytro Tomkin
OPOleksii Pedash
Oleksii Pedash
ONOlena Naumyk
Olena Naumyk
NVNaumyk Valeriy
Naumyk Valeriy
EKEduard Kondratiuk
Eduard Kondratiuk

29 January 2025 in New Materials and Technologies in Metallurgy and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
SDSerhii Danylov
Serhii Danylov
OPOleksii Pedash
Oleksii Pedash
NVNaumyk Valeriy
Naumyk Valeriy
DTDmytro Tomkin
Dmytro Tomkin
ONOlena Naumyk
Olena Naumyk
ДТДмитро Тьомкін
Дмитро Тьомкін
Purpose. Due to the complex modification of nickel-based superalloy with modifiers of different mechanisms of action, it is possible to increase the characteristics of plasticity and impact strength to a level that will allow to localize the possible destruction of large-sized blades of a low-pressure turbine of an aircraft engine during operation cycle. Research methods. Microstructure analysis and phase content investigation was carried out with optical and scanning electronic metallography on optical and electronic microscope respectively. Results. A study was conducted on the complex modification of the ЖС3ДК-ВІ alloy with yttrium and particles of ultradispersed titanium carbonitrides Ti(C,N) with variable content (from 0.025 % to 0.075 %), when pouring the melt into a ceramic mould, the first working layer of which was made with cobalt aluminate CoAl2O4 addition. In the structure of samples of experimental variants, along with carbides of spherical morphology, globular carbides were found, in the locations of which, zones enriched in yttrium, molybdenum, and titanium, and depleted in chromium, were observed. The results allow to make an assumption that, probably, high-temperature primary carbides of the YC-type serve as substrates for the formation of low-temperature modifications of MC carbides. In the material, after addition 0.050% ultrafine particles of titanium carbonitrides Ti(C,N) into the yttrium-modified melt, high levels of impact toughness (~70 J/cm2) and rupture life (> 500 h) are provided. Scientific novelty. New data were obtained regarding the phase state of the ЖС3ДК-ВІ alloy after complex modification according to the scheme (Ti(C,N)+Y+CoAl2O4). The fine structure of a nickel-based superalloy, which is traditionally used for large-sized turbine blades production of a gas turbine engine for aviation purposes, has been studied. Practical value. The obtained results expand the possibilities of using heat-resistant ЖС3ДК-ВІ alloy for responsible castings production.

20 June 2023 in New Materials and Technologies in Metallurgy and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
ONO. Naumyk
O. Naumyk
DTD. Tоmkin
D. Tоmkin
NVNaumyk Valeriy
Naumyk Valeriy
Мета дослідження. Проведення аналітичних розрахунків найважливіших параметрів, що визначають структурну і фазову стабільність та працездатність ливарного жароміцного нікелевого сплаву ЖС3ДК-ВІ, з використанням відомих розрахунково-аналітичних методик, для оцінки його загальної придатності для широкого застосування модифікування різними комплексами. Методи дослідження. Відповідно до розрахункових методик PHACOMP і New PHACOMP за хімічним складом γ- твердих розчинів розраховували параметри структурної стабільності: сумарну кількість електрон-них вакансій у γ- твердому розчині та сумарну кількість валентних електронів у γ- твердому розчині  dγ, з урахування значень параметра схильності сплаву до утворення топологічно щільно упакованих (ТЩУ) фаз. ΔЕ- методом оцінювали збалансованість хімічного складу сплаву за величиною параметра дисбалансу його си-стеми легування, з використанням комп’ютерного моделювання термодинамічних процесів методом CALPHAD в програмі (JMatPro). Відповідно до розробленої в НУ «Запорізька політехніка» комплексної розрахунково-аналітичної методики (КРАМ) визначали температурні параметри, значення границі короткочасної міцності та тривалої міцності при різних температурах для сплаву ЖДС3ДК-ВІ на різних рівнях легування за регресій-ними математичними моделями, отриманими на основі математичної обробки відомих експериментальних даних. Наукова новизна. Проведено комплекс розрахунково-аналітичних досліджень та визначено найважливіші параметри, що характеризують структурну і фазову стабільність та працездатність ливарного жароміцно-го нікелевого сплаву ЖС3ДК-ВІ. За значеннями параметрів дисбалансу системи легування ΔE та сумарної кількість валентних електронів в сплаві dС, сплав ЖС3ДК-ВІ є досить збалансованим поблизу середнього рівня вмісту елементів. Встановлено, що у всьому діапазоні легування Cr, W та Mo значення параметрів ПТЩУ, и  dγ несут-тєво монотонно знижуються, що свідчить про високий рівень структурної стабільності сплаву ЖДС3ДК-ВІ. Отримані розрахункові дані свідчать про те, що сплав ЖС3ДК-ВІ явно не є розрахованим на роботу при температурах, що наближуються до 1000 ºС на протязі 1000 годин. Практична цінність. Отримані результати свідчать про достатню стабільність сплаву ЖС3ДК-ВІ та його загальну придатність для широкого застосування модифікування різними комплексами для покращення рівня фізико-механічних та експлуатаційних властивостей.