Laboratory of Materials Technology and Process Engineering (LTMGP) University A/Mira, Faculty of Technology, Department of civil engineering, Bejaia, Algeria
Auto-generated profile, based on publicly available information
Karim Moussaceb
Laboratory of Materials Technology and Process Engineering (LTMGP) University A/Mira, Faculty of Technology, Department of civil engineering, Bejaia, Algeria
This study investigates the use of crushed glass waste as partial cement replacement in ordinary concretes. Six concrete mixes were designed and prepared: a reference without substitution and five substitution percentages of crushed glass waste ranging from 5% to 25%. The made concrete mix design underwent different tests, namely: slump test, mechanical strength, thermogravimetric analysis (TGA), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) determination and finally, water porosimetry, in order to evaluate the influence of the use of crushed glass waste on the properties of fresh and hardened concrete. Mechanical strengths results show that the use of 15% of the crushed glass waste improves the mechanical strength. TGA analysis confirms this result by highlighting a higher hydration degree. The latter contributes to the reduction of the porosity and, consequently, the mechanical strength increases. Also, it can be caused by the increasing amount of chromium which, if added a little, accelerates the hydration of C3S and leads to an increase of the mechanical strength. The BET technique and porosimetry tests showed that the use of crushed glass waste reduces the global porosity of concrete. This is due to the filling effect of the glass powder.
This study focuses on the characterisation of industrial waste coming from an Algerian factory of cutlery and the feasibility of its solidification/stabilisation (S/S) using hydraulic binders. Toxicity characteristic leaching procedure (TCLP) test, XRD and SEM–EDX analyses performed on the raw waste show that the latter has a high potential pollutant due to the presence of heavy metals such as “nickel, trivalent chromium, hexavalent chromium and lead” in high concentrations. Therefore, its S/S by cement seems to be a solution of its storage. For the study of its feasibility, two types of mix design were used with different waste/cement ratios. The initial and final setting times were evaluated for cement pastes. The mechanical strengths were evaluated at 7 and 28 days. Solidified/stabilised materials were submitted to TCLP test after 7 and 28 days. The leachates were analysed by flame atomic absorption spectrophotometry. XRD and SEM–EDX analyses were used to characterise the solidified/stabilised materials compounds. TCLP results highlight the efficiency of S/S treatment by reducing the pollutant potential of the waste. TCLP results show that mortars have a better efficiency in encapsulation pollutants compared to cement pastes, due to the difference in microstructure network between the two materials and the particle size of the waste.
31 August 2016 in Environmental Progress & Sustainable Energy