Svitlana Marusenko

Svitlana Marusenko

Auto-generated profile, based on publicly available information

Svitlana Marusenko

Національний технічний університет «Харківський політехнічний інститут», науковий співробітник кафедри «Теорія і системи автоматизованого проектування механізмів і машин», м. Харків

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2022 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
MTMykola M. Tkachuk
Mykola M. Tkachuk
AGAndrey Grabovskiy
Andrey Grabovskiy
AZAnton Zavorotnii
Anton Zavorotnii
SKSerhii Kutsenko
Serhii Kutsenko
MSMariia Saverska
Mariia Saverska
НПНаталія Пінчук
Наталія Пінчук
The paper develops a model of stress-strain state of torsion shafts. A variable formulation of the problem on the basis of the theory of variational inequalities was made. Numerical modeling of the stress-head-deformed state was made with the involvement of the finite element method. In the model of the stress-head-deformed state of torsion shafts, its generalized parametric description is integrated. It contains both varied significant design and technological indicators, in particular, the structural design of the torsion head, the galley transition and the diameter of the stem torsion shaft stem, and the parameters of the technological process of double winding: twist angles and features of the shaft material. It is established that the stresses that occur in the torsion shaft are mainly concentrated in the contact interaction zone of the spline shaft head with the spline coupling. The parametric dependencies of the level of equivalent stresses by Mises on the level of double windings and on the ratio of the head diameter and the stem of the torsion shaft stem have been determined. Recommendations have been developed regarding the improvement of strength characteristics of torsion shafts. Contact pressure distribution on the slots of the torsion bar head is also determined. Its characteristic features depend on the type of boundary conditions. If bilateral interaction is enabled on the boundary, the contact pressure may become negative. Furthermore, the contact pressure gets a sharp spike. This non-physical feature disappears if unilateral contact conditions are imposed. Therefore, this version of the boundary conditions is more adequate. It was used to compute the stress-strain state of a torsion bar, taking into account the plastic deformation of the material and the contact interaction with conjugate bodes. Keywords: torsional shaft; stress-strain state; finite element method; theory of variational inequalities; contact interaction

28 December 2022 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
AGAndrey Grabovskiy
Andrey Grabovskiy
VTVladeslav Tretyak
Vladeslav Tretyak
IVIryna Voloshina
Iryna Voloshina
MTMykola М. Tkachuk
Mykola М. Tkachuk
SMSvitlana Marusenko
Svitlana Marusenko
ОСОлег Стаховський
Олег Стаховський
In order to substantiate the advanced technical solutions of radial hydrovolume transmissions, it is necessary to study the stress-strain state of their most responsible and loaded elements. In particular, it is of interest to determine the rational parameters of cylinder block, which is subject to significant pressure of working fluid. This leads to the formation of a stress-strain state with a high level of stresses and elastic displacements. They can be dangerous in terms of strength, rigidity and performance of the hydraulic transmission in general. To carry out numerical studies of the stress-strain state of cylinder block of hydrovolume transmission at the design stage, finite element models with varied parameters are developed. However, at this stage of research, it is desirable to have a verified numerical model. For this purpose, the paper describes the computational and experimental studies of the layout of the cyclic part of the hydrovolume transmission cylinder block. On the one hand, these studies were performed using the experimental method of holographic interferometry. On the other hand, calculations were performed using the finite element method. In the course of comparison of the received results, the finite element model parameters are determined which provide high accuracy of the stress-strain state calculation of hydrovolume transmissions cylinder block. Keywords: stress-strain state; hydrovolume transmission; finite element method; cylinder block

24 April 2026 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
HTHanna Tkachuk
Hanna Tkachuk
DBDmytro Bibik
Dmytro Bibik
ОВОлег Веретельник
Олег Веретельник
SKSergiy Kravchenko
Sergiy Kravchenko
SMSvitlana Marusenko
Svitlana Marusenko
ІГІрина Гречка
Ірина Гречка
Modern civil and military vehicles are operated under intensive load conditions, including contact interaction. This causes problems with their strength and durability. In particular, these are elements of turboexpander units, vehicle transmissions, diesel locomotive and tank engines, engines, suspension systems, ground robotic complexes, as well as technological systems for their production. Accordingly, new design and technological solutions for these and other structural elements appear. In turn, there is a need to develop new models and methods for studying their stress-strain state taking into account contact interaction. Since in these cases it is necessary to take into account a number of new factors (roughness, spraying, heat treatment and hardening of the surfaces of parts), the problem arises of the adequacy, accuracy and efficiency of the study of the stress-strain state, including taking into account the contact interaction of such complex-profile critical structural elements. For this purpose, a computational-experimental method is developed and applied in the work, which combines, on the one hand, the analysis of the stress-strain state by various experimental methods, and on the other - by numerical-analytical means. As a result, firstly, the reliability of the results of such analysis sharply increases, and secondly, the effectiveness of design and technological solutions. In turn, such research provides fundamental advantages in the creation of civil and military equipment with basic technical and tactical and technical characteristics at the world level, including strength and durability. In particular, we are talking about increasing the efficiency, durability and load capacity of machines, units and equipment. The capabilities of the developed methodology are illustrated by the example of elements of diesel locomotive engines, radial hydrodynamic transmission, and power hydraulic cylinders. The results of the research are used as a basis for substantiating progressive technical solutions for objects of this type

22 May 2023 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
MSMariia Saverska
Mariia Saverska
AGAndrey Grabovskiy
Andrey Grabovskiy
MTMykola M. Tkachuk
Mykola M. Tkachuk
SKSerhii Kutsenko
Serhii Kutsenko
HTHanna Tkachuk
Hanna Tkachuk
ІСІгор Сопрунов
Ігор Сопрунов
The work describes computational and experimental studies of the stress-strain state of elements of technological systems. The distribution of movements of individual surfaces is determined on the example of vice-type adjustable machine tools. In the course of experimental studies, normal displacements are determined from the pattern of stripes on the hologram. The components of the displacement vector in the plane of the investigated surfaces are determined by scanning speckle interferograms. The obtained distributions of the displacement components were compared with the distributions determined by the finite element method. Satisfactory convergence of the results of numerical and experimental studies has been confirmed. The constructed calculation models can be used for further studies of the behavior of the housings of vice-type devices under the action of complex loads. The advantage of the developed version of the calculation-experimental method of studying the stress-strain state is its direct focus on the verification of the calculation model. The basic results are the results of experimental studies in the form of patterns of interference bands. These pictures describe the distribution of displacement fields of points on the surfaces of the bodies under study. With this picture, which was obtained on a natural object, the pictures of displacement fields, which were obtained during calculations with the application of the finite element method, are compared. Numerically calculated pictures are modified depending on the boundary conditions that are applied, as well as on the characteristics of the finite element models that are being built. In order to determine adequate boundary conditions and acceptable variants of finite-element models, the functional of the discrepancy of the displacement distribution fields obtained, on the one hand, numerically, and on the other - experimentally, is minimized. This construction of the calculation model verification algorithm demonstrated its efficiency and effectiveness. Keywords: stress-strain state; technological system; machine tool; finite element method; contact interaction

29 May 2026 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
OLOleh Loznyi
Oleh Loznyi
MTMykola M. Tkachuk
Mykola M. Tkachuk
OBOleksiy Bondarenko
Oleksiy Bondarenko
IKIryna Khramtsova
Iryna Khramtsova
NDNatalia Domina
Natalia Domina
LBLiudmyla Bondarenko
Liudmyla Bondarenko
In many machine-building structures, parts that are in contact interaction are widespread. In many cases, such interaction occurs on surfaces that nominally coincide or are close. That is, the gap between the bodies is nominally either zero or very small. In these cases, two factors become important factors. The first is the contact stiffness, which is determined by the properties of the near-surface layers of materials. The second factor is the perturbation of the geometric shape of the contacting surfaces. Examples can be elements of bearings, engines, rotor supports, dies, molds, etc. To study the contact interaction and the stress-strain state of such contacting bodies, a variational formulation has been developed. This formulation consists of adapting the Kalker variational principle. An additional term is added to the additional work functional, which depends on the properties of the near-surface layers of the contacting bodies and on the shape of the contacting surfaces. Thus, a single mathematical model takes into account both important factors. The boundary element method is used to discretize the problem. For this purpose, the desired contact pressure is approximated by a set of piecewise linear functions based on a triangular network. As a result, the problem of minimizing a quadratic function on a set of linear constraints in the form of inequalities arises. As an example, an analysis of the contact interaction of a ball piston with a running track of a radial hydraulic transmission is carried out

18 December 2023 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Verified
Journal Article
Open access
PDF file
SNSergej Nazarenko
Sergej Nazarenko
AGAndrey Grabovskiy
Andrey Grabovskiy
MTMykola M. Tkachuk
Mykola M. Tkachuk
OSOleksandr Shut
Oleksandr Shut
ALAndrii Lipeiko
Andrii Lipeiko
IKIryna Khramtsova
Iryna Khramtsova
При оснащенні танкових двигунів високообертовими елементами виникає низка проблем. Вони повязані з необхідністю аналізу напружено-деформованого стану та критичних режимів обертання цих елементів. Відповідно, потребує поглибленого аналізу вимоги та конструктивні рішення двигунів та їхніх високообертових елементів. Крім того, привертають увагу сучасні дослідження динаміки двигунів. Також слід звернути увагу на аналіз існуючих конструкцій систем турбонаддуву танкових двигунів. При цьому важливим є аналіз моделей та методів дослідження статичного та динамічного напружено-деформованого стану робочих коліс турбокомпресорів. Здійснений аналіз проблемних аспектів два можливість відзначити, що натепер проблема дослідження напружено-деформованого стану та критичних режимів обертання високообертових елементів танкових та двигунів для бронетехніки не має завершеного вирішення. Потрібні нові підходи, моделі та методи і засоби дослідження, що створюють основу для обґрунтування прогресивних технічних рішень. Ключові слова: бронетехніка; танкові двигуни; турбокомпресор; високообертові елементи; напружено-деформований стан