In this article, a novel single-phase single-stage ac–dc converter based on semi dual-active-bridge dc–dc converter is proposed for unidirectional power flow applications. Dual-phase-shift (DPS) and single-phase-shift (SPS) modes are adopted individually according to their operation. Only two control variables, which are primary side phase shift and the phase shift between the two bridges, are used. The optimal voltage and current waveforms in different operation modes are analyzed. The detailed transition process between the DPS mode and SPS mode is given, and the mode transition is seamless. The proposed converter can achieve high power factor correction without an inner current tracking loop. In addition, the switches can achieve zero-voltage switching on within a wide operating range and the rectifier diode can obtain zero-current switching off . The power transfer capability, mode transition mechanism, soft-switching range, mode operation range, and parameter design are analyzed. Besides, a 1 kW experimental prototype is built to verify the effectiveness of the proposed control strategy.
22 May 2023 in IEEE Transactions on Power Electronics
In this article, a novel decoupled inductor current modulation strategy for a single-stage ac–dc converter based on a semi dual-active-bridge is proposed, which helps minimize the total harmonic distortion (THD) and improve the conversion efficiency. The transformer turns ratio is designed in an optimized manner for higher conversion efficiency. Only two control variables are used. And the converter could achieve a wider output voltage range and a high power factor without the mandatory current-tracking loop and look-up tables. In addition, comparisons of losses, THD, and backflow power between the decoupled inductor current and the optimal peak current modulation are presented. The power transfer capability, mode transition mechanism, soft-switching range, mode operation region, and parameter design are analyzed. The switches can achieve zero-voltage-switching within a wide operating range, and rectifier diodes can achieve zero-current-switching off in all operation situations. Besides, a 1-kW experimental prototype was built to verify the effectiveness of the proposed control strategy.
21 February 2024 in IEEE Transactions on Power Electronics
In this article, an improved modulation and variable frequency control strategy for a single-stage high-frequency isolated semi-dual-active-bridge-based ac–dc converter is proposed, which can achieve full operating range (the entire ac line cycle and full-load range) zero-voltage switching (ZVS) and high efficiency. Compared with the basic variable frequency control, an improved variable frequency strategy can reduce the envelope of leakage inductor peak current and reduce the dependence and sensitivity to the load power. More accurate ZVS criteria in view of the magnetizing inductor Lm are proposed. Seven operating modes are adopted and the transition among them is seamless. Three control variables are used in every mode. Wide voltage conversion gain and high-quality grid-side ac current can be obtained without mandatory current-tracking loops. In addition, detailed comparisons among different control strategies and different mode operating regions are analyzed. The design of the transformer and inductor is not affected at all despite the switching frequency varies. A 250-W experimental prototype was built to verify the effectiveness of the proposed improved variable frequency control strategy.
10 June 2025 in IEEE Transactions on Power Electronics
In this article, a resonant semi-dual-active-bridge (semi-DAB) quasi-single-stage ac–dc converter is proposed. Its multimode control strategy with smooth transition is presented. Four decoupled resonant inductor current modulation modes with fixed switching frequency control strategy are given. The resonant tank is designed in an optimized way for better performance and higher conversion efficiency. The primary side switches can achieve zero voltage switching within entire ac line cycle including the zero crossing point of ac input voltage with the proposed fixed switching frequency control. In addition, the root mean square value of the resonant inductor current, the maximum current stress of switches and the turn-off current are compared with other modulation strategies under different operating conditions. The power transfer ability, mode transition mechanism and control strategy are also analyzed. A prototype of 220 V(ac), 270–400 V(dc), Prated = 1000 W was built to verify the effectiveness of the proposed modulation and control strategy.