3 October 2018 in IET Power Electronics
A transformer‐less dynamic voltage restorer (DVR) with bipolar voltage gain capability is proposed in this study. The DVR is formed by a three‐leg ac/ac converter with its output capacitor in series with the transmission line. Since the energy used for voltage compensation is obtained from the grid, long‐time voltage disturbances can be compensated without using bulky energy storage elements. As a result, the proposed DVR has the features of compact structure, light weight, and low cost. Moreover, it also has a high reliability as the commutation problem is avoided by adopting the proposed modulation strategy. A detailed analysis of the topology structure and operation principle is given, followed by the developed control method. Finally, simulations and experimental results are presented to verify the validity of the DVR.
23 October 2024 in IEEE Transactions on Device and Materials Reliability
This paper simulates the damage of 22nm FDSOI devices under strong electromagnetic pulse in radiation environment. After the introduction of strong electromagnetic pulse in the non-radiating device, the drain -body junction in the center of the device is damaged due to thermal deposition. The results of the strong electromagnetic damage of the device after different total ionizing doses of radiation show that the trap charge trapped in the oxide layer enhances the inverse pattern of the device after radiation. At the same time when the strong electromagnetic pulse is introduced, the electric field intensity in the channel region decreases and the current density increases compared with that before radiation. As a result, the thermal power density of the device increases and the thermal damage time point of the device advances. Finally, the simulation results of different radiation regions show that the trap charge in the BOX layer is the main reason for the reliability reduction of the device.