Jiangsu Key Laboratory of New Energy Devices and Interface Science School of Chemistry and Materials Science Nanjing University of Information Science and Technology Nanjing 210044 China
Auto-generated profile, based on publicly available information
Gao Chen
Jiangsu Key Laboratory of New Energy Devices and Interface Science School of Chemistry and Materials Science Nanjing University of Information Science and Technology Nanjing 210044 China
This review proposed dynamic structural reconstruction/transformation routes for OER and CO 2 RR electrocatalysts based on in situ X-ray diffraction/absorption spectroscopy.
Perovskite oxides exhibit potential for use as electrocatalysts in the oxygen evolution reaction (OER). However, their low specific surface area is the main obstacle to realizing a high mass-specific activity that is required to be competitive against the state-of-the-art precious metal–based catalysts. We report the enhanced performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) for the OER with intrinsic activity that is significantly higher than that of the benchmark IrO2, and this result was achieved via fabrication of an amorphous BSCF nanofilm on a surface-oxidized nickel substrate by magnetron sputtering. The surface nickel oxide layer of the Ni substrate and the thickness of the BSCF film were further used to tune the intrinsic OER activity and stability of the BSCF catalyst by optimizing the electronic configuration of the transition metal cations in BSCF via the interaction between the nanofilm and the surface nickel oxide, which enables up to 315-fold enhanced mass-specific activity compared to the crystalline BSCF bulk phase. Moreover, the amorphous BSCF–Ni foam anode coupled with the Pt–Ni foam cathode demonstrated an attractive small overpotential of 0.34 V at 10 mA cm−2 for water electrolysis, with a BSCF loading as low as 154.8 μg cm−2.
17 March 2020 in Angewandte Chemie International Edition
Practical application of hydrogen production from water splitting relies strongly on the development of low‐cost and high‐performance electrocatalysts for hydrogen evolution reaction (HER). The previous researches mainly focused on transition metal nitrides as HER catalysts due to their electrical conductivity and corrosion stability under acidic electrolyte, while tungsten nitrides have reported poorer activity for HER. Here the activity of tungsten nitride is optimized through rational design of a tungsten nitride–carbon composite. More specifically, tungsten nitride (WN x ) coupled with nitrogen‐rich porous graphene‐like carbon is prepared through a low‐cost ion‐exchange/molten‐salt strategy. Benefiting from the nanostructured WN x , the highly porous structure and rich nitrogen dopant (9.5 at%) of the carbon phase with high percentage of pyridinic‐N (54.3%), and more importantly, their synergistic effect, the composite catalyst displays remarkably high catalytic activity while maintaining good stability. This work highlights a powerful way to design more efficient metal–carbon composites catalysts for HER.