6 March 2024 in Physical Chemistry Chemical Physics
Through continuum simulations, the fundamental differences in grain-boundary properties in acceptor-doped SrTiO 3 obtained from imaging and electrical measurements are elucidated.
23 February 2024 in ChemElectroChem
Water electrolysis is a crucial technology for independency on fossil fuels. However, water splitting is limited by the sluggish kinetics of oxygen evolution reaction (OER). While many studies report highly active, non‐precious metal‐based electrocatalysts for alkaline OER, applicability under industrial conditions is often omitted. Such conditions require catalysts being applied on nickel or nickel‐containing alloys in elevated electrolyte concentrations. In contrast to the rather inert substrates often used in scientific studies, such industrially applied substrates exhibit significant OER activity themselves and show dynamic behaviour. Therefore, it is crucial to understand the OER behaviour of such substrates. Here, nickel and seven commercially available nickel‐containing alloys are investigated as anodes in alkaline OER and their elemental compositions correlated to their corresponding activities. Repeated potential cycling across the Ni(II)/Ni(III)‐redox couple is established as activity‐enhancing procedure. Overall, the nickel‐base alloy Hastelloy® X exhibits the highest activity due to its Fe‐, Cr‐, Mo‐ and Co‐content. Though, the activity gain differs significantly for the various materials. Comparing Ni and Hastelloy® X as least and most active materials, the positive impact of activation on both activity and stability becomes evident. While untreated Ni suffers from poor OER stability, the activity‐enhancing procedure also significantly increases electrode stability in 24 h chronopotentiometry.
1 October 2025 in Sustainable Energy & Fuels
Hydrogen purification is a crucial challenge for the efficient use of hydrogen as a sustainable energy carrier. However, systems combining the formation of hydrogen from easily transportable liquid organic carriers with purification after release are rarely reported. Here, we present an integrated system combining formic acid dehydrogenation (FADH) and electrochemical hydrogen pumping (EHP) for hydrogen purification. The [RuCl2(p-cymene)]2-catalysed dehydrogenation of formic acid generated stable H2-CO2 mixtures with ratios of 1 : 1 and 2 : 1. Small-scale EHP tests demonstrated that a supported PdPt catalyst exhibits high hydrogen oxidation reaction (HOR) activity and enhanced CO tolerance compared to a Pt benchmark catalyst. This integrated system offers a promising approach for hydrogen purification with potential applications in fuel cells and hydrogen storage systems.