23 February 2024 in ChemElectroChem
Water electrolysis is a crucial technology for independency on fossil fuels. However, water splitting is limited by the sluggish kinetics of oxygen evolution reaction (OER). While many studies report highly active, non‐precious metal‐based electrocatalysts for alkaline OER, applicability under industrial conditions is often omitted. Such conditions require catalysts being applied on nickel or nickel‐containing alloys in elevated electrolyte concentrations. In contrast to the rather inert substrates often used in scientific studies, such industrially applied substrates exhibit significant OER activity themselves and show dynamic behaviour. Therefore, it is crucial to understand the OER behaviour of such substrates. Here, nickel and seven commercially available nickel‐containing alloys are investigated as anodes in alkaline OER and their elemental compositions correlated to their corresponding activities. Repeated potential cycling across the Ni(II)/Ni(III)‐redox couple is established as activity‐enhancing procedure. Overall, the nickel‐base alloy Hastelloy® X exhibits the highest activity due to its Fe‐, Cr‐, Mo‐ and Co‐content. Though, the activity gain differs significantly for the various materials. Comparing Ni and Hastelloy® X as least and most active materials, the positive impact of activation on both activity and stability becomes evident. While untreated Ni suffers from poor OER stability, the activity‐enhancing procedure also significantly increases electrode stability in 24 h chronopotentiometry.
9 July 2024 in Fuel Cells
The anodic oxygen evolution reaction (OER) remains a bottleneck for electrocatalytic water splitting due to its sluggish kinetics and, thus, high overpotentials. This limits water electrolysis as a key technology for the generation of hydrogen as a sustainable alternative to fossil fuels. For alkaline water splitting, perovskite phases (ABO3) with earth‐abundant first‐row transition‐metals have emerged as a promising material class for OER electrocatalysts. Among these, LaNiO3 has been found to exhibit high intrinsic OER activity. To increase catalyst utilization, a high surface area of the catalyst is desirable and can be achieved by impregnation of porous templates. In this work, La–Ni‐based oxides were prepared via impregnation of activated carbon and subsequent heating, combining precursor calcination and template removal into one step. The phase structure of the samples is analyzed via powder X‐ray diffractometry, and the morphology is determined by scanning electron microscopy. The synergistic effect of B‐site mixing iron as well as A‐site mixing strontium into LaNiO3 is studied and found to increase its OER activity, confirming the activity‐enhancing effect of Fe in Ni‐based OER electrocatalysts. To allow for facile technical application of the catalysts, the electrodes are prepared by coating a perovskite ink onto Ni‐metal as industrially relevant substrates, followed by calcination.
25 February 2026 in Nanoscale
A solid solution series of five LaNi
1−
x
Fe
x
O 3 perovskite electrocatalysts with high specific surface areas were synthesized by a facile carbon templating method, and applied in the alkaline OER as ink coatings on metallic Ni substrates.