Gokhan Gultepe

Gokhan Gultepe

Auto-generated profile, based on publicly available information

Gokhan Gultepe

Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA, USA

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
GGGokhan Gultepe
Gokhan Gultepe
TKTumay Kanar
Tumay Kanar
SZSamet Zihir
Samet Zihir
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a 1024-element Ku-band phased-array transmitter for mobile satellite communications. The array is based on eight-channel transmit (TX) SiGe beamformer chips. Dual-polarized stacked-patch antennas enable the array to synthesize linear, rotated-linear, and left- and right-hand circular polarization. The array consists of four quadrants of 256-element subarrays, each of which has 64 beamformer chips and a driver chip assembled on a printed circuit board (PCB). The array achieves an effective isotropic radiated power (EIRP) of 75 dBm per polarization (78-dBm circular polarization) and scans to ±75° in all planes. This is achieved using an antenna spacing of $\lambda $ /2 at 14.4 GHz in an equilateral triangular grid. The array also results in 30-dB cross-polarization rejection up to 60° scan angles. Measured error vector magnitude (EVM) for 50-, 100-, 200-, and 500-MBd QPSK and 8 phase-shift keying (8PSK) waveforms results in at most 1.5%rms and 2.5%rms at $P_{1\textrm {dB}}$ and $P_{\mathrm{ sat}}$ , respectively, at 14 GHz over all scan angles. Also, the adjacent channel power ratio (ACPR) was measured as −32 dB for 200- and 500-MBd QPSK and 8 phase-shift keying (8PSK) waveforms at $P_{1\textrm {dB}}$ at 14 GHz. To the authors’ knowledge, this work presents a state-of-the-art planar phased-array system with high EIRP for Ku-band satellite communication (SATCOM) mobile transmitter terminals.

26 April 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
GGGokhan Gultepe
Gokhan Gultepe
TKTumay Kanar
Tumay Kanar
SZSamet Zihir
Samet Zihir
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a 1024-element dual-polarized Ku-band (10.7-12.7 GHz) satellite communication (SATCOM) receive (RX) phased array. The array consists of four 16 ×16 subarray tiles, each of which comprises 64 eight-channel beamformer chips, 256 dual-channel low-noise amplifiers (LNAs), and 256 dual-polarized antennas built on an affordable printed circuit board (PCB). The antennas spaced at λ/2 spacing at 12.2 GHz in an equilateral triangular grid allow scanning up to x±70° in all planes while maintaining a cross-polarization level $ <; -30$ dB. The use of LNAs just after the antennas enables a low-noise operation with an antenna gain-to-noise temperature (G/T) of 10.5 dB/K ( T ant = 20 K) at broadside while maintaining a directivity of 34 dB at 11.7 GHz. Also, a two-pole/two-zero filter is placed between the LNA and the beamformer chip to greatly attenuate any transmit leakage signal at 14-14.5 GHz. The lightweight, low-cost PCB with all silicon chips and a thickness of 3.4 mm presents a viable candidate for Ku-band SATCOM ground and Satcom-On-The-Move (SOTM) terminals.

22 December 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
AAAbdulrahman Alhamed
Abdulrahman Alhamed
GGGokhan Gultepe
Gokhan Gultepe
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article introduces a millimeter-wave (mm-wave) multi-band transmit (Tx) phased-array design supp- orting the fifth-generation (5G) new radio frequency range 2 (NR FR2) bands. An eight-element phased-array module is presented employing two wideband 16–52 GHz $4{\times }1$ Tx beamformer chips and tapered slot Vivaldi antenna array. The beamformer chips are designed in a SiGe BiCMOS process and flipped on a printed circuit board (PCB). The SiGe integrated circuit (IC) has four differential radio frequency (RF) beamforming channels each consisting of an active balun, analog adder-based phase shifter (PS), variable gain amplifier (VGA), and a two-stage class-AB power amplifier (PA). The RF input signal is distributed to the four channels using a compact Wilkinson network. The measured peak gain is 28.3 dB with 13.5–14.7 dBm output $P_{1{\mathrm {dB}}}$ and 14–15.4 dBm $P_{{\mathrm {sat}}}$ at 20–50 GHz. Each channel dissipates 250 mW from 2 V and 3-V supplies at $P_{1\,{\mathrm{ dB}}}$ . The beamformer chip is tested using 64-QAM waveforms and achieves a data rate of 2.4 Gb/s at 5.2% rms EVM and 9.6-dBm average power. The eight-element phased-array module shows a broadband performance with excellent patterns and ±60° scanning capability and with a peak effective isotropic radiated power (EIRP) of 32–34 dBm at 19.5–51 GHz. At an EIRP of 21–22 dBm, 400-MHz 256-QAM 5G-NR compliant waveforms are transmitted with < 2.98% EVM demonstrating 5G NR FR2 operation. To the author’s knowledge, this work achieves the highest bandwidth phased array with a peak EIRP of 34 dBm enabling the construction of multi-standard/multi-band 5G phased-array systems.

7 January 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AAAbdulrahman Alhamed
Abdulrahman Alhamed
OKOguz Kazan
Oguz Kazan
GGGokhan Gultepe
Gokhan Gultepe
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This work presents a 15–57 GHz multiband/ multistandard phased-array architecture for the fifth-generation (5G) new radio (NR) frequency range 2 (FR2) bands. An eight-element phased-array receive module is demonstrated based on two four-channel wideband beamformer chips designed in the SiGe BiCMOS process and flipped on a low-cost printed circuit board. The SiGe Rx chip employs RF beamforming and is designed to interface to a wideband differential Vivaldi antenna array. Each channel consists of a low-noise amplifier (LNA), active phase shifter with 5-bit resolution, variable gain amplifier (VGA), and differential-to-single-ended stage. The four channels are combined using a wideband two-stage on-chip Wilkinson network. The beamformer has a peak electronic gain of 24–25 dB and a 4.7–6.2 dB noise figure (NF) with a −29 to −24 dBm input $P_{\boldsymbol {1\,dB}}$ at 20–40 GHz. The eight-element phased-array module also achieved ultra-wideband frequency response with flat gain and low-system NF. The phased array scans ±55° with $ < -12$ -dB sidelobes demonstrating multiband operation. A 1.2-m over-the-air (OTA) link measurement using the eight-element Rx module supports 400-MHz 256-QAM OFDMA modulation with < 2.76% error vector magnitude (EVM) at multiple 5G NR FR2 bands. To the author’s knowledge, this work achieves the widest bandwidth phased array enabling the construction of multistandard systems.

2 September 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AAAbdulrahman Alhamed
Abdulrahman Alhamed
GGGokhan Gultepe
Gokhan Gultepe
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents 16–52-GHz multiband transmit and receive phased arrays designed to support multistandard 5G communications. The 64-element arrays are built using $16\,\times\, 1$ linear arrays, and each has four $4\,\times\, 1$ beamformer chips on a six-layer printed circuit board (PCB) with a Wilkinson combiner/divider network and tapered slot antennas. The wideband beamformer chips are designed in a SiGe BiCMOS process and use the RF beamforming architecture. The arrays have $\pm$ $60^{\circ}$ scanning capability in the azimuth plane and $\pm$ $30^{\circ}$ in the elevation plane with low sidelobes. The 64-element Tx array achieves an effective isotropic radiated power (EIRP) of 50–51.7 and 47.6–49 dBm at $P_{\rm sat}$ and $P_{1\,{\rm dB}}$ , respectively, at 24.5–48 GHz. The 5G-NR-compliant waveforms with 400 MHz and up to 256-quadrature amplitude modulation (QAM) are transmitted with <2.98% EVM $_{\rm rms}$ and 34–36 dBm average EIRP Single-carrier (SC) 400-MHz 64-QAM waveforms are also transmitted achieving <3% EVM $_{\rm rms}$ with 39–40.3 dBm average EIRP and 2.4 Gb/s data rate. The 64-element Rx array achieves a system NF of 5.3–6.9 dB and a measured $G$ / $T$ of $-$ 19.3 to $-$ 14.4 dB (with T $_{\rm ant} = 295$ K) at 20–50 GHz, and $<$ 2.6% error vector magnitude (EVM) performance when tested with 400-MHz 256-QAM 5G-NR-complaint packets. To the author’s knowledge, this work achieves the highest bandwidth Tx and Rx phased array systems suitable for multiband 5G operation.

26 July 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
GGGokhan Gultepe
Gokhan Gultepe
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a $16\times 16$ dual-polarized $Ku$ -band (10.7–12.7 GHz) satellite communications (SATCOM) phased-array receiver with simultaneous dual-beam reception capability. The array incorporates 64 16-channel beamformer chips and 256 dual-polarized antennas. A dual-channel low noise amplifier (LNA) is employed on every antenna to lower the system noise figure (NF) and increase the antenna gain-to-noise temperature (G/T). The phased-array is built on a low-cost printed circuit board (PCB), with an antenna spacing of $\lambda $ /2 at 12.2 GHz in an equilateral triangular grid to result in ±70° scan volume, and is capable of receiving two concurrent data-streams with a distinct direction of arrival (DOA) since it employs two 64:1 Wilkinson combiner networks. A transmit band (14–14.5 GHz) filter is also implemented between the LNA and the beamformer chip. The 256-element array has a directivity of 28 dB at mid-band with a G/T of 5 dB/K ( $T_{\mathrm{ ant}}=20$ K), which results in a G/T of 11 dB/K for a 1024-element array. This array is a feasible solution for make-before-break connections and for multi-satellite reception systems, such as simultaneous television (TV) reception and connectivity.