18 March 2019 in Journal of Fluid Mechanics
Free surface oscillations in a narrow gap between elongated parallel bodies are studied numerically. As this represents both a highly resonant system and an arrangement of relevance to offshore operations, the nature of the damping is of primary interest, and has a critical role in determining the response. Previous experimental work has suggested that the damping could be attributed to laminar boundary layers; here our numerical wave tank successfully resolves both wave and boundary layer scales to provide strong numerical evidence in support of this conclusion. The simulations follow the experiments in using wave groups so that the computation is tractable, and both linear and second harmonic excitation of the gap are demonstrated.
26 October 2020 in IEEE Transactions on Sustainable Energy
Performance analysis is conducted for an adaptive bistable wave power capture mechanism under white noise wave excitation. The adaptive bistable mechanism is composed of two oblique springs responsible for bistable characteristics, and two auxiliary springs realizing the ‘adaptive’ feature. White noise wave excitation is adopted to investigate effects of multi-frequency input in absence of different energy distribution characteristics. Time domain simulations are performed based on Cummins equations derived from linear potential flow theory. Results indicate that the adaptive bistable mechanism still bears a better power performance than its linear counterpart which may be well explained by its inherent ‘phase control’ feature in white noise wave excitation. A parametric study is also carried out to investigate how the performance of the adaptive bistable mechanism is affected by main and auxiliary spring stiffness, random phase of wave excitation and power-take-off damping.
23 September 2022 in Journal of Fluids and Structures
7 June 2023 in Journal of Fluids and Structures
1 September 2023 in Coastal Engineering Proceedings
Most studies on wave-in-deck loads focus on head-on wave impingement whereas wave-in-deck loads due to waves incident from oblique directions are rarely reported. Numerical simulations for oblique wave-in-deck loads were presented in Iwanowski et al. (2002), Brodtkorb (2008) and Chen et al. (2018). However, in these studies, only numerical validations were performed against either two-dimensional experiments or empirical formulations due to a lack of experimental results. In light of this, we present the experimental results for wave impacts on a solid deck model due to a transient focused wave group incident from oblique direction in this study. The oblique experimental data is compared with the head-on counterpart by Santo et al, (2020) to investigate the incident wave angle effect on wave-in-deck loads. Numerical simulations are carried out to reproduce both the head-on and oblique wave-in-deck experiments using a three-dimensional (3D) numerical wave tank (NWT), and flow field information is interrogated to derive physical insights into complex wave-deck interactions. The solid deck model is a representative of a typical 2nd generation North Sea topside structures commonly exposed to severe winter weather. The configuration is also applicable to coastal structures such as bridges, piers, jetties or docks.