29 September 2021 in IEEE Internet of Things Journal
Beam scanning antenna brings new opportunities to reduce the data collision of multinode communication in the Internet of Things (IoT). This article proposes a new type antenna design scheme that can be used for IoT relay communication. A programmable beam scanning antenna without phase shifters operating in the X-band is designed to evaluate the feasibility of this scheme. The integrated design of excitation source and phase-modulated structure greatly reduces the profile of the antenna and improves the integrated degrees of freedom with other equipment. By switching the state of the PIN diode loaded on each element, different radiators can be selected and the direction of current polarization on elements can be adjusted to change the radiation phase. Furthermore, the diode states are encoded by the holographic antenna theory and controlled by the FPGA controller to realize programmable beam scanning. One-element, two-element, and 1-D array containing 32 elements are fabricated and measured. The experimental results are in good agreement with the simulation data. The operating bandwidth is 7.5% at 10 GHz while the beam scanning range of the array is $- 60{^\circ }$ –60°, with a good scanning accuracy and stability. The proposed low-profile beam scanning antenna can provide stable communication services to multiple users and smart devices as a new type of beam scanning array antenna solution for the IoT application, which is beneficial to this field.
24 July 2025 in IEEE Transactions on Antennas and Propagation
An ultrawideband energy selective surface (ESS) for adaptive prevention of high-intensity radiation fields (HIRF) is proposed in this paper. With a triple-layer structure loaded with PIN diodes, the ultrawideband transmission property from C- to X-band was achieved in both the OFF- and ON-state of the diode. Without active biasing, the state of the loaded diodes was directly controlled by the intensity of the incident waves. Unlike the low insertion loss (IL) realized in OFF-state, the shielding effectiveness (SE) in ON-state was high to prevent the incident waves. Therefore, the proposed ESS could adaptively respond to the HIRF’s illumination and simultaneously switch its transmission property. After full-wave simulations and waveguide measurements, the bandwidth of IL below 1 dB and SE over 20 dB were achieved from 6.30 GHz to 12.20 GHz, demonstrating a 64% fractional bandwidth for HIRF prevention.
3 November 2014 in EURASIP Journal on Wireless Communications and Networking
Static topology analysis is not sufficient for the dynamic vehicular ad hoc network. Understanding the evolving topology of vehicular ad hoc networkings (VANETs) caused by vehicle mobility is very important for routing protocol design and algorithm optimization. This paper explores the spatial and temporal features of vehicular network topologies based on two real taxi-trace datasets. The analysis results reveal that the whole topology of VANETs consists of a large number of small-sized connected components. Two quantitative metrics are proposed to measure the stability and location dependency of the connected components. When the communication range is greater than a threshold, a large proportion of vehicles will connect to the biggest connected component, which is relatively stable and covers the most part of the downtown region of the city. Based on the analytical results, we propose several design philosophies and new research issues for VANETs.
20 June 2022 in IEEE Transactions on Vehicular Technology
A 1-bit low-profile patch antenna array integrating beam scanning and adaptive high-intensity radiation fields (HIRF) protection is proposed in this paper. Each antenna element consists of two dielectric layers, two radiation patches, a ground plane, and a feeding network. By electronically controlling a pair of coding diodes in the same direction, the antenna element can achieve 180 $^\circ$ phase difference, producing two logical states, namely “0” and “1”. It has good beam scanning capability in the range of −60 $^\circ$ to 60 $^\circ$ . When the proposed antenna is exposed to HIRF, the protective diodes mounted over the grounded coplanar waveguide (GCPW) transmission line are triggered, dramatically reducing the overall gain of the antenna array. By optimizing design, the element possesses a bandwidth of 8.8 $\sim$ 9.3 GHz. The grating lobe of the antenna array is suppressed by 17.5 dB thanks to the adoption of the non-uniform feed. The simulation results indicate that the proposed antenna element and array have a high isolation degree of 22.4 dB and 23.2 dB when exposed to HIRF, respectively. Finally, a prototype of the antenna is fabricated, and the validity of the proposed design is experimentally verified. The experimental results are in good agreement with the simulation results, demonstrating the validity of the proposed design.
17 September 2025 in IEEE Antennas and Wireless Propagation Letters
This letter presents an energy-selective substrate-integrated waveguide (SIW) slotted antenna with nonlinear component loading for high-intensity radiation fields (HIRFs) protection. The proposed design integrates PIN diodes and lumped inductors across the slots to achieve adaptive admittance modulation. Through equivalent circuit parameter extraction, the nonlinear network deliberately detunes slot admittance under HIRFs exposure, disrupting original resonance via field-induced admittance transforming. The alteration changes the antenna's radiation pattern, reducing the realized gain over 23 dB after measured, and thus providing HIRFs preventing. The proposed antenna demonstrates enhanced electromagnetic protection in HIRFs environments and stable radiation characteristics in normal operation.
1 August 2025 in IEEE Open Journal of Antennas and Propagation
This paper proposed a folded transmitarray antenna for high-intensity radiation fields (HIRF) protection, which can adaptively change gain based on the intensity of the incident electromagnetic field. When the field intensity is low, the antenna has a phase compensation function to achieve high-gain characteristics of the antenna and receives electromagnetic waves with low loss. In HIRF, the antenna removes its phase compensation and reflects the incident electromagnetic wave, which reduces the receiving efficiency of electromagnetic waves and achieves protection for HIRF. After simulation and measurement, with a low-intensity incident wave, the antenna’s gain is over 20 dBi in the central frequency. In HIRF, the antenna can remove the gain of transmitarray, causing the antenna’s gain to decrease to the level of the antenna feed about 7 dBi. This paper provides a new perspective on antenna design by integrating electromagnetic protection mechanisms into the antenna structure, and proposes an antenna that can adapt to HIRF and protect backend electronic devices.