Biomaterials and Transport Phenomena Laboratory (LBMPT), Faculty of Technology, Department of Process and Environmental Engineering, University of Yahia Fares, Medea, Algeria
Auto-generated profile, based on publicly available information
Salah Hanini
Biomaterials and Transport Phenomena Laboratory (LBMPT), Faculty of Technology, Department of Process and Environmental Engineering, University of Yahia Fares, Medea, Algeria
The feasibility of the application of the Photo-Fenton process in the treatment of aqueous solution contaminated by Tylosin antibiotic was evaluated. The Response Surface Methodology (RSM) based on Central Composite Design (CCD) was used to evaluate and optimize the effect of hydrogen peroxide, ferrous ion concentration and initial pH as independent variables on the total organic carbon (TOC) removal as the response function. The interaction effects and optimal parameters were obtained by using MODDE software. The significance of the independent variables and their interactions was tested by means of analysis of variance (ANOVA) with a 95% confidence level. Results show that the concentration of the ferrous ion and pH were the main parameters affecting TOC removal, while peroxide concentration had a slight effect on the reaction. The optimum operating conditions to achieve maximum TOC removal were determined. The model prediction for maximum TOC removal was compared to the experimental result at optimal operating conditions. A good agreement between the model prediction and experimental results confirms the soundness of the developed model.
In this study, an intelligent architecture-based neuro-fuzzy technique is used for the prediction of removal capacity of Cu(II) and Cr(VI) from aqueous solution using wheat straw as a biosorbent. The effect of operating parameters such as initial pH, temperature, contact time, straw particle size, and biosorbent’s chemical treatment are studied to optimize the conditions for maximum removal capacity. A large database is collected from the different carried out experiments to allow the modelization of the adsorption process. This process could be described using classical mathematical models such as Langmuir, Freundlich, or a hybrid model. However, the learnt neuro-fuzzy architecture with the obtained experimental data presents good correlation ( ) and shows that the intelligent model is able to predict accurately the removal amount of Cu(II) and Cr(VI) from wheat straw under different conditions.
The biosorption of cobalt from aqueous solution onto a spent coffee (SC) was carried out to assess the effectiveness of the adsorbent used in the removal of Co(II) from aqueous solution by batch tests. Adsorption of Co(II) as a function of contact time, pH, and temperature was investigated. The kinetic study revealed that adsorption followed better a second-order type reaction with high correlation coefficient (R2 = 0.999). Adsorption data were described using Freundlich and Langmuir models. The thermodynamic study for the Co(II) adsorption onto SC showed that the process was spontaneous with a raised affinity for Co(II) (ΔG° < 0 and ΔS° > 0), exothermic (ΔH° < 0), and occurred with physical adsorption mechanism (Ea = 10.922 kJ mol−1).