In this study, pre-treated low-carbon steel substrates were electroplated with Zinc–Nickel (ZN) alloy composite coatings enhanced by the incorporation of nano-silicon dioxide (SiO2) particles in an alkaline solution. ZN deposits with varying concentrations of nano-SiO2—specifically, 1, 2, 3, 5, and 10 wt%—were achieved by adjusting the ratio between the nano-SiO2 and ZN alloy electroplating solutions. The influence of the nano-SiO2 content on both the quality of the coating and its corrosion behavior was investigated in detail. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an atomic force microscope (AFM) were utilized to assess the surface, cross-section structure, elemental composition, and thickness of the coatings. Notably, the addition of nano-SiO2 improved the microstructure of the coating, leading to a reduction in grain size as well as enhancements in uniformity and density while revealing that co-deposition reached an optimal concentration at 3 wt% nano-SiO2. The corrosion behavior of coated specimens was evaluated through electrochemical impedance spectroscopy (EIS) and polarization techniques within a 3.5 wt% NaCl solution serving as a corrosive medium. Specifically, for typical prepared coatings, the corrosion current density decreased from 1.410 × 10−4 A·cm−2 to 5.762 × 10−6 A·cm−2, which is a remarkable reduction by one to two orders of magnitude relative to the SiO2-free coatings mentioned previously. These findings provide a straightforward approach for selecting 3 wt% nano-SiO2 as an effective additive in ZN composite coatings.
The passivation of zinc alloy coating was achieved through the utilization of both silicate and trivalent chromium passivation systems, employing a specific process formula consisting of Co(NO3)2 at a concentration of 2.5 g/L, C76H52O46 at 3 mL/L, Na2SiO3 at 25 g/L, C6H5Na3O7 at 15 g/L, and an appropriate amount of organic accelerator. The composite passivation of silicate and tannic acid was found to be more effective than the trivalent chromium passivation film, as it successfully eliminated the dendrite structure on the coating surface and reduced surface defects. The coordination between negatively charged SiO2− or SiO2 micelles and Zn2+ results in the formation of a passivation film that exhibits lower corrosion current and higher corrosion potential compared to the trivalent chromium passivation film. Additionally, the impedance test fitting results indicate that the silicate passivation film possesses a higher resistance value. Overall, the proposed silicate passivation system presents a viable alternative to the toxic chromate passivation system, offering non-toxicity and superior protective performance relative to the trivalent chromium passivation system.
The novel pyridine oxime-based complexing agents 2-pyridinecarboxaldehyde oxime, 2-acetylpyridine ketoxime and 2-pyridine amidoxime were synthesized for alkaline Zn-Ni alloy electrodeposition, outperforming conventional citrate/TEPA systems in corrosion resistance and microstructural control. The N,O-bidentate chelation mechanism governs metal ion reduction kinetics via diffusion-limited pathways, enabling γ-phase Ni5Zn21 intermetallic formation and nanocrystalline refinement. Electrochemical and microstructural analyses demonstrate suppressed random nucleation and hydrogen evolution side reactions, leading to enhanced charge transfer resistance and reduced corrosion current density. Notably, 2-pyridine amidoxime achieves ultrasmooth surfaces through defect-free nanocluster growth, while 2-pyridinecarboxaldehyde oxime maximizes γ-phase crystallinity. The synergy between grain boundary density and surface integrity establishes a dual protection mechanism combining barrier layer formation and active dissolution suppression. This work advances microstructure engineering via coordination chemistry, offering a breakthrough over traditional zincate electroplating for high-performance anti-corrosion coatings.