1 March 2022 in Physics of Fluids
Unsteady three-dimensional direct numerical simulations of highly turbulent, complex-chemistry, lean hydrogen-air flames were performed by changing the equivalence ratio , root mean square velocity , and turbulence length scale . For each set of , to explore the influence of molecular transport coefficients on the turbulent burning velocity , four cases were designed: (i) mixture-averaged diffusivities; (ii) diffusivities equal to the heat diffusivity of the mixture for all species; (iii) mixture-averaged diffusivities for all species with the exception of O2, whose diffusivity was equal to the diffusivity of H2 to suppress preferential diffusion effects; and (iv) mixture-averaged diffusivities multiplied with to suppress Lewis number effects but retain preferential diffusion effects. The computed results show a significant increase in due to differences in molecular transport coefficients even at Karlovitz number as large as 565. The increase is documented in cases (i) and (iii) but is not observed in case (iv)—indicating that this phenomenon is controlled by Lewis number effects, whereas preferential diffusion effects play a minor role. The phenomenon is more pronounced in leaner flames, with all other things being equal. While the temperature profiles conditionally averaged at the local value of the combustion progress variable and sampled from the entire flame brushes are not sensitive to variations in molecular transport coefficients at high , the -profiles sampled from the leading edges of the same flame brushes show significant increase in the local temperature in cases (i) and (iii) characterized by a low Lewis number.
5 June 2022 in International Journal of Hydrogen Energy
1 December 2022 in Physics of Fluids
Undulations are ubiquitous in natural swimmer propulsion, propelling in Omni-direction. In the present work, the hydrodynamic performance of an unconstrained carangiform swimmer in the absence of a free stream is numerically investigated at different Reynolds numbers. Propulsive speed is found to increase with an increase in undulatory frequency, wavelength, and Reynolds number. The passive lateral oscillating amplitude is closely related to the wavelength and kinematic viscosity, but insensitive to the undulatory frequency. The propulsive mechanisms for the variation of the propulsive speed are revealed by the vortical structures and the time-averaged velocity field. Scaling relationships are investigated and we found that the effects of the wavelength on the propulsive performance cannot be neglected at high Reynolds number, i.e., Reref {greater than or equal to} 1000, and the scaling relationship between the flapping Reynolds number and the propulsive Reynolds number is refinedwith the wavelength adopted as the characteristic length, which generalizes the previous scaling law proposed by Gazzola et al.1. Besides, the scaling relationships related to the power consumption, the cost of transport, the Strouhal number, and the passive lateral oscillating amplitude are revealed. These results are crucial in furthering our understanding of carangiform's self-propulsion and will aid the development of advanced bio-inspired propulsors.
1 August 2025 in Physics of Fluids
Analyzed in the paper are three-dimensional complex-chemistry direct numerical simulation data obtained from lean hydrogen–air flames under various conditions (25 cases; equivalence ratios ϕ=0.35 and 0.5; the normalized root mean square velocity 0.25≤u′/SL≤54.1; the normalized turbulence length scale 0.5≤L/δLT≤2.6; and Karlovitz number 1.0≤Ka≤1315, where SL and δLT are laminar flame speed and thickness, respectively). These data are supplemented with data obtained in two-dimensional and three-dimensional complex-chemistry simulations of unstable laminar flames in the same computational domains. The reported results show that diffusional-thermal instability (DTIns) dominates turbulence in three weakly turbulent flames (Ka≤1.5). In more intense turbulence, burning rate is still significantly increased by differential diffusion effects, but manifestations of DTIns appear to be less pronounced. Specifically, (i) contribution of highly curved reaction zones (curvature radius is smaller than the instability neutral wavelength) to the bulk burning rate is significantly increased with increasing u′/SL and Ka, (ii) amplitudes of local perturbations in the equivalence ratio, temperature, fuel consumption, or heat release rate are significantly different in unstable laminar and turbulent flames, and (iii) bulk burning rates are also significantly different. The emphasized differences are increased with increasing u′/SL and Ka. These trends imply a decreasing role played by DTIns in turbulent flames at higher Karlovitz numbers, whereas differential diffusion effects result in significantly increasing bulk burning rate at Ka as large as 1315.
1 August 2023 in Physics of Fluids
The twofold integral-based decompositions of skin-friction and wall heat flux coefficients are implemented in compressible temporal transitional channel flows with direct numerical simulation and constrained large eddy simulation (CLES) to explore (i) the generations of the skin-friction and wall heat flux coefficients and their overshoot during the transition and (ii) why CLES under-predicts the overshoot phenomenon. The Reynolds shear stress, the mean velocity gradient with respect to time, and the mean velocity convection are dominating terms during the transition process of skin friction coefficient Cf, and the effect of the mean velocity convection becomes stronger as the Mach number (Ma) increases. For the wall heat flux coefficient Bq, the turbulent heat transfer, the mean energy gradients in time, and the viscous stress are significant contributors. The effects of molecular heat transfer and the mean convection on transition are increasingly important to Bq as Ma increases. The overshoot of Cf and Bq at Ma = 1.5 is mainly caused by the significant changes of mean velocity profiles and mean energy profiles with respect to time respectively. At Ma = 3.0, the overshoot of Cf is due to the significant change of mean velocity profiles in time and the mean velocity convection, while the overshoot of Bq is due to the mean energy changes in time and mean energy convection. It is found that the underestimation of the overshoots of Cf and Bq in CLES is primarily caused by the variances of the mean velocity gradient and mean energy gradient, respectively.
1 June 2026 in Physics of Fluids
Analyzed in the paper are previously published and newly generated three-dimensional direct numerical simulation data obtained from statistically planar and one-dimensional, lean complex-chemistry H2-air flames propagating in a box with forced turbulence. Under the study conditions, root-mean-square turbulent velocity is varied from 2.2 to 54 laminar flame speeds SL, integral length scale of turbulence is varied from 0.5 to 2.25 laminar flame thicknesses, Damköhler and Karlovitz numbers are varied from 0.01 to 0.53 and from 10 to 1315, respectively. Two equivalence ratios, 0.5 and 0.35, are explored. Turbulent burning velocities are evaluated not only for these eight low Lewis number flames, but also for equidiffusive counterparts to them. Analyses of these burning velocities and conditioned profiles of temperature, fuel consumption, and heat release rates show significant influence of differential diffusion effects on the local structure of flame reaction zones and burning rate in all eight cases, even at Karlovitz number Ka as high as 1315. On the contrary, both magnitude of superadiabatic temperature and probability of finding it are decreased with increasing Ka. The latter trend is attributed to intensification of turbulent mixing in flame oxidation zones where fuel consumption rate is low. Therefore, the two phenomena (increase in burning rate due to differential diffusion effects and appearance of superadiabatic hot spots) are not inextricably linked. Differential diffusion effects can increase burning rate even if turbulence is intense enough to erase superadiabatic hot spots.