22 November 2018 in European Journal of Applied Mathematics
Tissue engineering aims to grow artificial tissues in vitro to replace those in the body that have been damaged through age, trauma or disease. A recent approach to engineer artificial cartilage involves seeding cells within a scaffold consisting of an interconnected 3D-printed lattice of polymer fibres combined with a cast or printed hydrogel, and subjecting the construct (cell-seeded scaffold) to an applied load in a bioreactor. A key question is to understand how the applied load is distributed throughout the construct. To address this, we employ homogenisation theory to derive equations governing the effective macroscale material properties of a periodic, elastic–poroelastic composite. We treat the fibres as a linear elastic material and the hydrogel as a poroelastic material, and exploit the disparate length scales (small inter-fibre spacing compared with construct dimensions) to derive macroscale equations governing the response of the composite to an applied load. This homogenised description reflects the orthotropic nature of the composite. To validate the model, solutions from finite element simulations of the macroscale, homogenised equations are compared to experimental data describing the unconfined compression of the fibre-reinforced hydrogels. The model is used to derive the bulk mechanical properties of a cylindrical construct of the composite material for a range of fibre spacings and to determine the local mechanical environment experienced by cells embedded within the construct.
1 February 2018 in Journal of Theoretical Biology
13 October 2015 in Journal of Fluid Mechanics
The use of channel pressurisation in drawing microstructured optical fibres (MOFs) potentially allows for fine control of the internal structure of the fibre. By applying extra pressure inside the channels it is possible to counteract the effect of surface tension which would otherwise act to close the channels in the fibre as it is drawn. This paper extends the modelling approach of Stokes et al. (J. Fluid Mech., vol. 755, 2014, pp. 176–203) to include channel pressurisation. This approach treats the problem as two submodels for the flow, one in the axial direction along the fibre and another in the plane perpendicular to that direction. In the absence of channel pressurisation these models decoupled and were solved independently; we show that they become fully coupled when the internal channels are pressurised. The fundamental case of a fibre with an annular cross-section (containing one central channel) will be examined in detail. In doing this we consider both a forward problem to determine the shape of fibre from a known preform and an inverse problem to design a preform such that when drawn it will give a desired fibre geometry. Criteria on the pressure corresponding to fibre explosion and closure of the channel will be given that represent an improvement over similar criteria in the literature. A comparison between our model and a recent experiment is presented to demonstrate the effectiveness of the modelling approach. We make use of some recent work by Buchak et al. (J. Fluid Mech., vol. 778, 2015, pp. 5–38) to examine more complicated fibre geometries, where the cross-sectional shape of the internal channels is assumed to be elliptical and multiple channels are present. The examples presented here demonstrate the versatility of our modelling approach, where the subtleties of the interaction between surface tension and pressurisation can be revealed even for complex patterns of cross-sectional channels.
15 December 2015 in Optical Materials Express
A series of six experiments drawing tubular fibres are compared to some recent mathematical modelling of this fabrication process. The importance of fibre tension in determining the internal geometry of the fibre is demonstrated, confirming a key prediction of the models. There is evidence of self-pressurisation of the internal channel, where an additional pressure is induced in the internal channel as the fibre is drawn, and the dependence of the magnitude of this pressure on fibre tension is discussed. Additionally, there is evidence that the difference between the glass and furnace temperatures is proportional to the furnace temperature and dependent on the preform geometry.
20 January 2007 in Journal of Computational Physics
16 November 2010 in Journal of Computational Physics