Many synthesis methods are available to obtain a set of specific characteristics for lead zirconate titanate (PZT) piezoelectric ceramic powders. In this work, we have successfully prepared PZT powder samples through the Polymeric Precursor Method with x = 0.6, according the general formula Pb (ZrxTi1-x)O3. The powders were thermally treated from 380 to 550 oC and characterized by Raman spectroscopy and X-ray diffraction (DRX) in order to evaluate the effects of thermal treatment on the phase formation and the crystallization processes. The results obtained by Raman spectroscopy were compared to refined crystal data obtained by Rietveld method, leading to coherent conclusions about the structural effects occurring along the temperature of calcination. It was possible to characterize the tetragonal perovskite phase as predominant phase occurs only after 500 oC, but its crystallinity is already determined by synthesis method. Thus, no ordering process is verified for perovskite as a function of the temperature increasing during thermal treatment, in spite of the continuous pyrochlore-to-perovskite phase transition. The pyrochlore secondary phase starts to vanish before its proper crystallization process, changing the tetragonality of previously formed perovskite phase.
The direct synthesis methods such as Polymeric Precursor Method can be used as direct route for the synthesis of ceramic-metal composites with high dispersion of metallic nanoparticles. The control of the polymer decomposition in order to avoid the organic matter combustion permits the pyrolysis occurrence, which originates the metallic phase embedded in the ceramic matrix. In this work, a nickel-silica nanocomposite in additional amorphous carbon interphase was successfully obtained through the Polymeric Precursor Method. It was observed by Transmission Electronic Microscopy that metallic nickel nanoparticles nucleate with sizes from 10 to 50 nm inside the mesopore matrix composite. The analysis of Nitrogen Adsorption-Desorption Isotherms for samples pyrolysed at several times showed the existence of two sizes of mesopores, one with diameter of 3.8 nm, associated to the silica-carbon matrix and other above 10 nm, associated to the meso and macropores containing nickel nanoparticles.
Hydrotalcite are anionic clay material presenting LDH arrangement and high porosity and specific areas, which make it a good adsorbent for pollutant species in water. Besides that, that material type can be used as catalyst or catalyst support in several industrial processes. The most common compositions is based on metallic mix hydroxide with high content of magnesium, but their adsorptive properties arise from aluminum replacement in layer structure. The present work presents the synthesis of carbonated magnesium-aluminum hydrotalcite through the precipitation method in order to investigate the co-insertion of iron (III) in aluminum site. It was found the iron (III) co-inserted samples obtained at 100 and 200 oC for 4 hours present no substantial harming in relation to the common magnesium-aluminum composition. All of the samples presented high porosity and specific area, becoming an alternative anionic adsorptive.
Particulate composite materials containing metallic phase in ceramic matrices may be obtained by direct routes with the advantage of avoiding the partial collapse of the composite structure when a subsequent step for metal insertion is carried out. The non-metallic silica-carbon matrix combines high values of pore volume and surface area with chemical refractivity and may be applied as molecular sieves, adsorbents, filters and catalyst support. The Polymeric Precursor Method is a versatile method to obtain this composite type as the metal precursor can be reduced to metallic phase by pyrolysis of organic matter. In this work, it was used three different diol chain sizes obtaining silica-carbon composites through the pyrolysis of polyester precursor at 600°C for 3 hours in closed tubular oven. It was observed a direct dependence between the amorphous carbon phase amount and the polyester chain size. All of the composite samples presented dual distribution for mesopore size, situated at 3.8 and 11 nm in diameter. However, the pore volume and surface area significantly lowers for larger polyester chain sizes.
Amorphous embedded nickel-silica composites can be directly obtained by Polymeric Precursor Method when the polymeric precursor is pyrolysed in controlled atmosphere. The metallic particles dispersion into the matrix composite is very important to material applications, but the resistance against the oxidation under extreme conditions is also required. In this work, nickel-silica nanocomposite sample was synthesized for containing amorphous carbon as matrix interphase through the direct route based on the Polymeric Precursor Method. The composite sample was obtained by pyrolysis of polymeric precursor at 600 oC for 1 hour under nitrogen flow and then submitted to oxidation in oxygen flow at 400 oC up to 7 hours. It was observed by Transmission Electron Microscopy the metallic nickel nanoparticles present high dispersion into matrix composite. However, in spite of the border of the composite particles are easily oxidized and originate nickel oxide phase, as proven by X-Ray Diffraction, the amorphous carbon phase acts as protective phase for the majority of the composite sample. By Nitrogen Adsorption-Desorption Isotherms at 77 K it was demonstrated the carbon phase also preserves significantly the mesoporous nature of the composite under oxidation process.