1 December 2002 in Applied Physics A
15 May 2012 in Journal of Applied Physics
Due to the very limited availability of 3He, new kinds of neutron detectors, not based on 3He, are urgently needed. Here, we present a method to produce thin films of 10B4C, with maximized detection efficiency, intended to be part of a new generation of large area neutron detectors. B4C thin films have been deposited onto Al-blade and Si wafer substrates by dc magnetron sputtering from natB4C and 10B4C targets in an Ar discharge, using an industrial deposition system. The films were characterized with scanning electron microscopy, elastic recoil detection analysis, x-ray reflectivity, and neutron radiography. We show that the film-substrate adhesion and film purity are improved by increased substrate temperature and deposition rate. A deposition rate of 3.8 Å/s and substrate temperature of 400 °C result in films with a density close to bulk values and good adhesion to film thickness above 3 μm. Boron-10 contents of almost 80 at. % are obtained in 6.3 m2 of 1 μm thick 10B4C thin films coated on Al-blades. Initial neutron absorption measurements agree with Monte Carlo simulations and show that the layer thickness, number of layers, neutron wavelength, and amount of impurities are determining factors. The study also shows the importance of having uniform layer thicknesses over large areas, which for a full-scale detector could be in total ∼1000 m2 of two-side coated Al-blades with ∼1 μm thick 10B4C films.
13 December 2008 in Journal of Applied Crystallography
1 March 2020 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
16 April 2001 in Physical Review B
Mesoscopic (500–2000 Å) and microscopic (5–20 Å) phase segregation with temperature and magnetic field was studied in the model manganite by high-resolution neutron diffraction and inelastic neutron scattering. Intragranular strain-driven mesoscopic segregation between two insulating phases, one of which is charge ordered (CO), sets in below the CO temperature in zero field. The CO phase orders antiferromagnetically, while the other insulating phase shows spin-glass behavior. After field-induced metallization, the CO phase coexists with a ferromagnetic metallic phase.
10 January 2005 in Physical Chemistry Chemical Physics
The OSIRIS neutron instrument on the ISIS pulsed source now affords the option of high-resolution quasi-elastic and inelastic neutron spectroscopy. In this paper, the performance of OSIRIS is presented, with the spectroscopic characteristics of the instrument being discussed in terms of energy resolution, signal to background ratio and neutron count rate. Recent improvements to the spectrometer are described, in particular the effect of cooling the crystal analysers close to liquid helium temperature to enhance the sensitivity of the instrument. The performance of OSIRIS is also likened to back-scattering, crystal analyser spectrometers at other neutron sources.