Copper(II) hexacyanoferrate(III) (CuHCF) modified carbon paste electrode was used for the electroanalytical determination of dipyrone and acetaminophen in pharmaceutical preparations by cyclic voltammetry. Several parameters were investigated for the optimization of the sensor such as composition of the electrode, electrolytic solution, effect of pH, scan rate of potential and interference. The best conditions were found for an electrode composition in mass of 20% CuHCF, 55% graphite and 25% mineral oil in acetate buffer containing 0.05 mol L-1 of NaCl. The analytical curve was linear in the dipyrone and acetaminophen concentration ranged from 1.25 x 10-5 mol L-1 to 1.23 x 10-3 and 2.84 x 10-4 to 2.59 x 10-3 mol L-1 respectively, being successfully applied to the determination of dipyrone and acetaminophen in pharmaceutical preparations. The CuHCF modified carbon paste electrode presented comparable results to those obtained using iodimetry and ultraviolet spectrophotometry methods, respectively.
7 March 2007 in Journal of Thermal Analysis and Calorimetry
Caffeine determination using a fast-scan voltammetric procedure at a carbon fiber ultramicroelectrode (CF-UME) is described. The CF-UME was submitted to electrochemical pretreatment. Parameters such as number of acquisition cycles, scan rate, potential window, and the electrochemical surface pretreatment were optimized. Using the optimized conditions, it was possible to achieve a LDR from 10.0 up to 200 μmol L-1, with a LOD of 3.33 μmol L-1. The method has been applied in the determination of caffeine in commercial samples, with errors of 1.0-3.5% in relation to the label values and recoveries of 97-114% within the linear range