Jin Tak Kim

Jin Tak Kim

Auto-generated profile, based on publicly available information

Jin Tak Kim

Hydraulic Robot Laboratory, AI Robotics R&D Department, Korea Institute of Industrial Technology, Ansan, South Korea

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2022 in IEEE Robotics and Automation Letters
Verified
Journal Article
Open access
SHSangchul Han
Sangchul Han
SCSanguk Chon
Sanguk Chon
JKJungYeong Kim
JungYeong Kim
JSJaehong Seo
Jaehong Seo
DSDong Gwan Shin
Dong Gwan Shin
JCJungsan Cho
Jungsan Cho
This letter presents a gripper module for a snake-like robot to perform search and rescue tasks in a narrow space. The proposed gripper module has three features: (1) It can accommodate the fingers inside its body. (2) It has three fingers that can grip objects with irregular surfaces stably. (3) One of the fingers is equipped with a camera on the fingertip to search in a narrow space. To implement the above features in a small, light, and compact gripper module, we propose a novel design of a gripper module with three fingers and eight degrees of freedom. The joint configuration of the proposed gripper is unique compared with a general-type gripper. A prototype of the proposed gripper module has been integrated into a snake-like robot to demonstrate its capability of performing rescue tasks in a collapsed environment. The three features of the proposed gripper module are experimentally verified: it is light (0.4 kg), small (less than 68 mm in diameter), and powerful (grasping force = 2.48kgf).

24 May 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
SLSungho Lee
Sungho Lee
SYSungwoon Yoon
Sungwoon Yoon
YJYonghwan Jeong
Yonghwan Jeong
JSJaehong Seo
Jaehong Seo
SPSangshin Park
Sangshin Park
JCJungsan Cho
Jungsan Cho
This letter proposes a multi-degrees-of-freedom two-wheeled inverted pendulum robot (mD-TWIPR) for off-road transportation. A two-wheeled inverted pendulum robot (TWIPR), popularly known as a segway, has high mobility owing to its simple structure without steering or suspension. The proposed robot has a car-like structure with a low and elongated body that provides advantages for transporting long objects, such as pipes, or transferring patients on off-road terrain. However, a car-like TWIPR structure faces several challenges, including limited acceleration, difficulty traversing slopes, asymmetric payload, and lower ability to climb steps. To address these issues, we implemented a sliding mechanism in the mD-TWIPR. The proposed mD-TWIPR is designed to move without tilting while carrying movable mass, and tilt the torso according to the 20 $^{\circ }$ slope. It can also maintain stationary on a slope with only a small wheel torque by positioning the center of mass on the fulcrum, which is advantageous for transportation operations. Furthermore, it can climb a step using a combination of the wheel and sliding mechanism. The paper discusses the modeling and design specifications and presents a prototype and experiments to verify the proposed performance of mD-TWIPR.

17 October 2025 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
MLMinho Lee
Minho Lee
HKHyeonseok Kim
Hyeonseok Kim
JKJin Tak Kim
Jin Tak Kim
SPSangshin Park
Sangshin Park
JLJeong Hyun Lee
Jeong Hyun Lee
JHJemin Hwangbo
Jemin Hwangbo
The simulation-to-reality (sim-to-real) transfer of large-scale hydraulic robots presents a significant challenge in robotics because of the inherent slow control response and complex fluid dynamics. The complex dynamics result from the multiple interconnected cylinder structure and the difference in fluid rates of the cylinders. These characteristics complicate detailed simulation for all joints, making it unsuitable for reinforcement learning (RL) applications. In this work, we propose an analytical actuator model driven by hydraulic dynamics to represent the complicated actuators. The model predicts joint torques for all 12 actuators in under 1 $\mu$s, allowing rapid processing in RL environments. We compare our model with neural network-based actuator models and demonstrate the advantages of our model in data-limited scenarios. The locomotion policy trained in RL with our model is deployed on a hydraulic quadruped robot, BeTheX-Q, which is over 300 kg. This work is the first demonstration of a successful transfer of stable and robust command-tracking locomotion with RL on a heavy hydraulic quadruped robot, demonstrating advanced sim-to-real transferability.

13 May 2022 in Journal of Field Robotics
Verified
Journal Article
Open access
JKJin Tak Kim
Jin Tak Kim
SPSangshin Park
Sangshin Park
SHSangchul Han
Sangchul Han
JKJinhyeon Kim
Jinhyeon Kim
HKHyogon Kim
Hyogon Kim
JCJungsan Cho
Jungsan Cho
The frequent occurrence of disasters has prompted the development of efficient disaster‐responding equipment. This study deals with the design of special‐purpose machinery and its performance assessment. We defined scenarios through the environmental analysis of disaster situations and expert consulting. We also formulated a set of design specifications by analyzing the objectives of the tasks that must be performed at disaster sites, based on simulated scenarios and existing disaster response machinery. The disaster‐responding special‐purpose machinery was designed to perform various tasks and display rapid movement in disaster situations. Moreover, this paper presents the control structure configured to operate the developed machinery. The performance of the special‐purpose machinery was assessed through different scenario tests.

21 July 2022 in Actuators
Verified
Journal Article
Open access
PDF file
SCSang Uk Chon
Sang Uk Chon
JSJaehong Seo
Jaehong Seo
JKJungyeong Kim
Jungyeong Kim
SHSangchul Han
Sangchul Han
SPSangshin Park
Sangshin Park
JCJungsan Cho
Jungsan Cho
Teleoperation, in which humans and robots work together to improve work performance, is growing explosively. However, the work performance of teleoperation is not yet excellent. Master–slave systems with different kinematics and workspaces need space-transformation control techniques. These techniques cause psychological fatigue to an operator with poor manipulation skills. In this study, we propose an intuitive master design that focuses on fatigue. Large workspaces reduce mental fatigue; however, they lead to physical fatigue problems. To solve this problem, we reflect the role of actuators in the design, through functional separation using movement and gravity compensation. This study proposes the design and prototype fabrication of an intuitive master K-handler to improve remote-work performance. The K-handler features six degrees of freedom (DoF), an anthropomorphic structure, and a lightweight nature. It has a reach long enough to cover the workspace of the human arm to reduce mental fatigue. In addition, gravity compensation, which can reduce the operator’s physical fatigue during operation, is possible in all workspace areas.

17 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JKJungyeong Kim
Jungyeong Kim
JCJungsan Cho
Jungsan Cho
JKJin-Hyeon Kim
Jin-Hyeon Kim
JKJin-Tak Kim
Jin-Tak Kim
SHSangchul Han
Sangchul Han
HYHAN UL YOON
HAN UL YOON
When we develop wearable assistive devices, comfort and support are two main issues that need to be considered. In conventional design approaches, the degree of freedom of the wearer’s joint movements tends to be oversimplified. Accordingly, the wearer’s motion becomes restrained and bone/ligament injuries might occur in case of an unexpected fall. To mitigate these issues, this paper proposes a novel joint link mechanism inspired by a human spine structure as well as functionalities. The key feature of the proposed spine-like joint link mechanism is that hemispherical blocks are concatenated via flexible synthetic fiber lines so that their concatenation stiffness can be adjusted according to a tensile force. This feature has a great potentiality for designing a wearable assistive device that can support aged people’s sit-to-stand action or augment spinal motion by regulating the concatenation stiffness. In addition, the concatenated hemispherical blocks enable the wearer to move his/her joint with full freedom, which in turn increases the wearer’s mobility and prevents joint misalignment. The experimental results with a testbed and a pilot wearer substantiated that the spine-like joint link mechanism can serve as a key component in the design of wearable assistive devices for better mobility.