1 December 2019 in Soil and Tillage Research
12 November 2019 in Acta Technologica Agriculturae
The paper presents a dynamic model of four-element machine-and-tractor designed on the basis of a combined soil-cultivating-sowing aggregate and a tractor with an articulated frame. The pseudo velocity of the first tractor half-frame was considered a generalised coordinate. The control impact upon the tractor was obtained by means of the bending angle of the tractor half-frames. The trajectories and movement speeds of the aggregate elements were calculated as a function of time for the driving mode along a straight-line path and the tractor movement according to the harmonic control law. By means of the measuring system, trajectories of the aggregate elements were obtained. It was established that the movement trajectories of the aggregate elements represent a complex assessment parameter of the mathematical model adequacy of the aggregate plane-parallel movement. There was found a regularity of the aggregate turning radius and the bending angle of the tractor half-frames.
20 December 2017 in Acta Technologica Agriculturae
The harvest and transport of sugar beet leaves during harvesting can be considered a current task in the area of sugar beet growing system development. A rotary sugar beet leaf cutting mechanism is used for achieving the significant increase in the harvester forward speed during harvest. This leads to intensive vibrations of the topping mechanism in the longitudinal vertical plane causing the decrease of harvest quality. Therefore, it is necessary to analytically determine the effect of kinematic and design parameters of the sugar beet topping mechanism front-mounted on the tractor and to discover the value of the amplitude of oscillations in the longitudinal vertical plane of its sugar beet topping mechanism. We have constructed a mathematical model of the estimated motion of this machine by means of dynamics equations in Lagrange II-kind form. A system consisting of two non-linear differential equations was obtained by developing the equivalent scheme of selected generalized coordinates and by performing the necessary mathematical transformations. This system describes the vibrations of the sugar beet topping mechanism in the longitudinal vertical plane. The optimal design and kinematic parameters of the sugar beet topper mechanism front-mounted on the tractor were determined by means of our own software and numerical solution of the differential equation system, which allows the reduction of mentioned vibrations.
24 May 2017 in 19th International Scientific Conference Engineering for Rural Development Proceedings