Tingting Jiang

Tingting Jiang

Auto-generated profile, based on publicly available information

Tingting Jiang

School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
TJTingting Jiang
Tingting Jiang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
Liang XuLiang Xu
Liang Xu
This article proposes a series of split-tooth stator permanent magnet (PM) Vernier machines with zero-sequence current excitation, which integrates enhanced torque density and flux adjustment capability. The key is to design the split tooth to exert desired dual magnetic field modulation effect so as to efficiently utilize the hybrid magnetic fields by the PM and zero-sequence current. Meanwhile, with the split-tooth design, the paralleled flux paths are achieved to offer improved flux regulation capability and reduced PM demagnetization risk. In this article, the machine topologies and operation principle are introduced. Hybrid excitation magnetic field is analyzed with the consideration of dual magnetic field modulation of split-tooth structure. Influences of split tooth and PM on torque and flux regulation capability are analyzed. Electromagnetic performances of the proposed machine are analyzed and compared. A prototype is manufactured and tested to validate the theoretical analysis.

10 March 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
TJTingting Jiang
Tingting Jiang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
Liang XuLiang Xu
Liang Xu
JJJinghua Ji
Jinghua Ji
In this article, a novel parallel hybrid excitation field modulated machine with efficient utilization of multiworking harmonics is proposed. The key of the proposed machine is to efficiently integrate the parallel hybrid excitation and multiworking harmonics to enhance average output torque and flux regulation capability. First, operation principle and air-gap magnetic field harmonics of the machine are investigated by using field modulated principle, which reveals the contribution of each working harmonic to flux linkage and torque. Then, performances of the machine are analyzed, such as open-circuit back-EMF, flux regulation capability, torque-speed characteristics, etc. Also, the proposed machine is compared to conventional ones for evaluation. Finally, a prototype is manufactured and tested to validate the theoretical and simulated results.

3 April 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
GLGuohai Liu
Guohai Liu
ZCZhiyuan Chen
Zhiyuan Chen
Liang XuLiang Xu
Liang Xu
TJTingting Jiang
Tingting Jiang
LCLele Chang
Lele Chang
This paper proposes an overall maximum torque per ampere (MTPA) control for dc-biased hybrid excitation machine (dc-biased HEM) using MTPA control law and virtual signal injection. The mathematical model of the machine is first analyzed in synchronous rotating reference frame. According to the characteristic of the mathematical model, a control strategy is proposed and consists of two parts, i.e., an MTPA control law and a virtual dc-biased signal injection. The MTPA control law is employed to calculate the dominant current references while ensuring the rapid dynamic performance. The virtual dc-biased signal injection method is a correction scheme for MTPA current deviation caused by parameter variations. Unlike conventional signal injection techniques, this signal injection method considers the nonlinearity of inductance and does not involve any filters. Thus, it can extract MTPA criterion more accurately and easily. In general, simulation and experimental results validate that the control strategy combined with MTPA control law and virtual signal injection can achieve accurate MTPA operation and rapid dynamic magnetization capability for the dc-biased HEM in real time.

4 April 2024 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Liang XuLiang Xu
Liang Xu
HRHui Ren
Hui Ren
TJTingting Jiang
Tingting Jiang
GLGuohai Liu
Guohai Liu
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
For the zero phase shift dual three-phase surface-mounted permanent magnet synchronous motors, the traditional fault-tolerant control (FTC) strategy can ensure the stable operation of under open-phase fault. However, the copper loss minimization was not considered. For this reason, an FTC strategy for open-phase and open-switch faults to minimize the copper loss is proposed in this paper. First, the zero phase shift vector space decoupling matrix is given and the mathematical model of the motor is derived. Then, the relationship between the six-phase currents and dqz -axis currents is analyzed. The minimum copper loss reference currents under open-phase and open-switch faults are determined based on the relationship between the dqz -axis current and copper loss. On the other hand, since the normal transformation matrix is no longer applicable to the faulty cases, a reduced-order vector space decoupling matrix is constructed and utilized in the FTC strategy to generate independent reference voltage control quantities. Finally, the proposed FTC strategy is experimentally validated to verify the feasibility of the strategy.

1 March 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
TJTingting Jiang
Tingting Jiang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
Liang XuLiang Xu
Liang Xu
HWHuanan Wang
Huanan Wang
In the design of magnetless multitoothed doubly salient (DS) machine, most multitoothed structures are regarded as uniform distribution, while the influence of multitoothed distribution on performance is ignored. This article investigates the design of magnetless DS machine with consideration of multitoothed distribution. Analytical expressions, including magnetomotive force, permeance modulation, air-gap flux density, flux linkage, and back electromotive force, are derived to reveal the mechanism of multitoothed distribution. Then, different multitoothed distribution models are optimized through a genetic algorithm combined with a finite-element method for maximum torque and reduced torque ripple. It is found that with the consideration of multitoothed distribution design, a ~20% torque improvement is achieved in the machine. Finally, the effectiveness of the theoretical analysis and multitoothed distribution design is validated by finite-element simulation and experiments.

20 February 2025 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Liang XuLiang Xu
Liang Xu
YZYouhui Zhi
Youhui Zhi
CQChen Qian
Chen Qian
TJTingting Jiang
Tingting Jiang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
SNShuangxia Niu
Shuangxia Niu
This paper proposes a direct torque control strategy for a DC-Biased hybrid excitation vernier machine with adjustable zero-sequence current. The machine structure and drive system are first introduced, and the machine model is built under the stator flux linkage field orientation. Then, the mathematical equations are derived, and the regulation principle of torque and stator flux linkage is clarified. According to model's characteristics, the maximum torque per ampere operation principle for the machine is analyzed. Afterward, a direct torque control strategy based on stator flux linkage adaptive regulation is proposed, where the stator flux linkage can be adaptively regulated under the zero-sequence current reasonable distribution so as to realize maximum torque per ampere operation. In addition, a combined flux linkage observer is designed for accurate estimation of stator flux linkage. Furthermore, since conventional direct torque control strategy has issues with torque and flux ripples, the space vector modulation is utilized. Overall, the experimental results verify the effectiveness of the proposed control strategy.