Huanan Wang

Huanan Wang

Auto-generated profile, based on publicly available information

Huanan Wang

School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
HWHuanan Wang
Huanan Wang
TTTao Tao
Tao Tao
DXDezhi Xu
Dezhi Xu
The conventional model predictive torque control (MPTC) suffers from the heavy computation burden and the uncertainty of the weighting factor. This article proposed a new MPTC scheme for a five-phase permanent magnet synchronous motor by using double virtual voltage vectors (VVVs), in which no weighting factor is required. The VVVs that can restrain the harmonics work as the candidate vectors. The deadbeat principle is adopted to predict the reference voltage, which can be used to select the optimal VVV directly in avoid of testing all candidate VVVs, and hence, the computation burden is reduced. The geometric principle is applied to select the second voltage vector and calculate the vector duration. The second vector can be a VVV or null vector. Therefore, double VVVs or a VVV and a null vector can be synthesized for the next period. It should be noted that no weighting factor is required because of the introduced geometric principle. Due to the selection of the second voltage vector, the torque and flux ripples are reduced and the steady-state performance is improved. The proposed MPTC has the same fast dynamic response with the conventional MPTC. The experiments are presented to verify the proposed MPTC scheme.

26 July 2021 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
HWHuanan Wang
Huanan Wang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
HThongyu tang
hongyu tang
TTTao Tao
Tao Tao
SSSuleman Saeed
Suleman Saeed
This paper proposes an improved fault-tolerant model predictive torque control (MPTC) for a five-phase permanent magnet synchronous motor based on deadbeat solution, which offers the reduced computation burden, good steady-state performance and simple control structure. Under the open-circuit fault condition, the virtual voltage vectors (VVV) which can restrain the harmonics work as the candidate vectors. The deadbeat solution is adopted to predict the reference voltage vector. The optimal VVV can be selected directly and rapidly according to the sector of the reference voltage vector. Hence the computation burden can be reduced largely because the process of testing all candidate VVVs is avoided. In order to reduce the error between the reference voltage vector and the selected VVV, a null vector is introduced by a simple geometric principle. Then, the duration of the selected VVV can be obtained. Therefore, the steady-state performance is enhanced because of the deadbeat solution and the multi-vectors in each control period. The experiments are presented to verify the proposed fault-tolerant MPTC.

5 February 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
SMSen Ma
Sen Ma
TTTao Tao
Tao Tao
YWYunjiang Wu
Yunjiang Wu
JLJincheng Ling
Jincheng Ling
HWHuanan Wang
Huanan Wang
In dual three-phase permanent magnet synchronous motor (DTP-PMSM) drive, six-phase current information is critical to motor control. However, the adoption of multiple current sensors increases the size and cost of inverters. To mitigate this issue, this article proposes a method to reconstruct six-phase currents of a DTP-PMSM by using a single current sensor (SCS). First, the SCS is repositioned to a current branch. Then, sampling is performed twice in one period based on the switching state of a single bridge arm. Therefore, two orthogonal phase currents are achieved. Furthermore, the synchronous filtering reconstruction method is proposed. Through this method, the harmonic current information is extracted from two orthogonal currents and the remaining four-phase currents are reconstructed. Overall, six-phase currents can be accurately reconstructed by using an SCS, for which the hardware cost and inverter size can be reduced. The proposed method is validated by both simulation and experiments.

16 December 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
TTTao Tao
Tao Tao
LYLei Yan
Lei Yan
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
SLSen Liu
Sen Liu
HWHuanan Wang
Huanan Wang
Vibration issues due to open-circuit faults have been overlooked by existing fault-tolerant control methods. To reduce vibrations in five-phase permanent magnet synchronous motors (PMSMs) under open-circuit fault conditions, a low-vibration fault-tolerant control method using modified space vector pulsewidth modulation (SVPWM) and random switching frequency (RSF) SVPWM is proposed. Virtual voltage vectors for the faulty PMSM are reconstructed using basic vectors with the constraint of zero harmonic spatial components. The action time of the virtual voltage vectors, considering the back electromotive force (EMF) of the faulty phase, is then calculated. To suppress high-frequency harmonics without compromising the fault-tolerant performance of the motor, a new RSF-SVPWM with restricted random numbers and improved probability density is proposed. By combining the modified SVPWM with the RSF-SVPWM, the proposed method can reduce vibration while maintaining good fault-tolerant performance. Experimental results validate the feasibility of the control strategy.

30 April 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HWHuanan Wang
Huanan Wang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
XDXiaoyan Diao
Xiaoyan Diao
Christopher H. T. LeeChristopher H. T. Lee
Christopher H. T. Lee
Compared with the Y-connection topology in five-phase motor drive, the open-leg fault will lead to unique postfault characteristics in series-end winding (SEW) topology, for which the most common used winding connection sequence (WCS) of ADBEC will lose the advantage of large speed range. This article newly proposes the open-leg fault-tolerant control for five-phase SEW permanent-magnet synchronous motor. First, the open-leg fault is divided into two types in SEW topology. For the type II fault, in terms of different postfault targets such as minimum copper loss and maximum torque, the harmonic current references are firstly derived for different WCSs. Then, the voltage compensation scheme is adopted to achieve the desired fault-tolerant currents. Subsequently, the postfault performance indicators are comparatively analyzed across different WCSs. It is concluded that under type II faulty condition, WCS of ABCDE can achieve the smaller fault-tolerant currents, less copper loss and same speed range comparing with ADBEC. In addition, the postfault performances of both type I and II faults are also theoretically compared with Y-connection and pentagon topologies. The experimental results are presented to verify the analysis and the conclusions, which can provide more basis for selecting which WCS in practical application of SEW topology.

1 March 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
TJTingting Jiang
Tingting Jiang
Wenxiang ZhaoWenxiang Zhao
Wenxiang Zhao
Liang XuLiang Xu
Liang Xu
HWHuanan Wang
Huanan Wang
In the design of magnetless multitoothed doubly salient (DS) machine, most multitoothed structures are regarded as uniform distribution, while the influence of multitoothed distribution on performance is ignored. This article investigates the design of magnetless DS machine with consideration of multitoothed distribution. Analytical expressions, including magnetomotive force, permeance modulation, air-gap flux density, flux linkage, and back electromotive force, are derived to reveal the mechanism of multitoothed distribution. Then, different multitoothed distribution models are optimized through a genetic algorithm combined with a finite-element method for maximum torque and reduced torque ripple. It is found that with the consideration of multitoothed distribution design, a ~20% torque improvement is achieved in the machine. Finally, the effectiveness of the theoretical analysis and multitoothed distribution design is validated by finite-element simulation and experiments.