3D printing technology was developed nearly 30 years ago. One of its characteristics is that instead of removing materials, 3D printing creates 3D elements directly from CAD models, adding one layer of material on another. This offers a beneficial capability of making complex elements in terms of shape and materials, impossible to be manufactured by traditional methods. Owing to intensive research in recent years, considerable progress has been achieved in the development and commercialisation of new innovative processes of 3D printing by fused deposition modeling (FDM), including printing of composite materials. The study outlines the main methods of creating polymer composite structures using FDM technology.
The study involved research related to the selection of the material with improved functional properties that can be used for dental prostheses. An innovative system of nanofillers, that differ in shape, by means of gelatin-modified halloysite nanotubes (HNTs-g) along with silane-coupled aluminum trihydrate (ATH-sil) was prepared, in order to observe a synergistic improvement of acrylic material (methyl methacrylate with methyl methacrylate monomer (MM/mMM)). Selected mechanical properties of manufactured nanocomposites, along with utilitarian properties, like hardness, buffer solution absorption, and abrasion resistance, along with a fall test from the height of finished products have been discussed. Moreover, the study of the biofilm formation on the surface of dental prostheses confirmed the occurrence of a synergistic improvement of properties and the legitimacy of using modified mineral nanofillers in the form of a hybrid system.
The properties of poly(butylene terephthalate) (PBT) based nanocomposites filled with MWCNTs (multiwall carbon nanotubes) and epoxy peroxide functionalized MWCNTs (EpMWCNTs) have been studied. The analysis was focused on the influence of EpMWCNTs on the phase structure, thermal, mechanical and electrical properties of synthesized materials. Functionalized MWCNTs were observed to be highly dispersed and well integrated in the PBT matrix. Obtained results demonstrate that the incorporation of EpMWCNTs into the PBT matrix yields materials of enhanced thermo-oxidative stability. It was found that the crystallization temperature for all the obtained nanocomposites is slightly higher than that for the neat polymer. Increasing the concentration of nanofiller in both MWCNT and EpMWCNT systems improved the mechanical properties Young's modulus, tensile strength and fracture strain. The electrical conductivity of nanocomposites decreased due to the functionalization of MWCNTs with epoxy peroxide.
8 March 2021 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
The article presents the results of the research related to the decomposition of polylactic acid (PLA)/halloysite nanotube (HNTs) biocomposites into a simple organic form. After manufacturing the nanocomposites, the evaluation of the composting process simulation was conducted using the biodegradation method. First, the selected properties of PLA/HNTs biocomposites, such as density, water absorption, and impact strength were tested. Next, the impact of the composting process on the behavior of PLA/HNTs composites was investigated from 30 to 90 days. Finally, the loss of mass of the composites, hardness, and the structural changes of biocomposites under the composting conditions before and after the composting were evaluated using SEM microscopy. The results showed that the PLA modified by HNT particles has biodegradation-friendly properties and therein is fully suitable for organic recycling. Due to this, in the coming years, it may contribute to the replacement of non-biodegradability polymers, i.e. polyolefins and polyesters, and reduction of plastic packaging wastes.
1 March 2016 in Archives of Metallurgy and Materials
The authors attempted at examining the effect of heat treatment on abrasive wear resistance of metal composite castings. Metal matrix composites were made by infiltrating preforms created from unordered short fibers (graphite or silumin) with liquid aluminium alloy AlSi12(b). Thus prepared composites were subject to solution heat treatment at a temperature of 520°C for four hours, then aging at a temperature of 220°C for four hours. Abrasion resistance of the material was tested before and after thermal treatment
This work has described the production of single-polymer composites by the film-stacking method. Two types of single-polymer composites with different mass fractions of the polyester reinforcement phase (10% and 20%) and the PETG matrix were investigated. The produced composites were subsequently recycled by injection moulding, pressing, and extrusion. Selected properties of the processed composites were determined: density, viscosity-average molecular weight, impact resistance, and tensile strength. The work done in this paper has demonstrated the benefits and drawbacks of each recycling method for these materials. The selected properties of single-polymer polyester composites and single-polymer polyester composites that were recycled by extrusion have also been compared.