24 May 2018 in IEEE Photonics Technology Letters
Low-excess-loss arrayed waveguide gratings are enabled by unique application of deep UV lithography in InP integrated photonics through reduced feature sizes and, more specifically, well-resolved inter-waveguide gap dimensions. Submicrometer wafer-flatness is shown to be required to achieve the critical dimension uniformity better than 10 nm on 3-in substrates. Arrayed waveguide grating devices were fabricated and the effect of inter-waveguide gap scaling on the excess losses was measured and compared to simulations. Excess losses down to 0.15 dB were demonstrated to be lower than predicted with the 2-D simulations. The tapering of the etch depth inside the gaps due to the lag effect of the etch process may explain the improvements.
1 July 2024 in IEEE Access
Heterogeneous integration helps to maximize the performance of photonics or electronics devices by leveraging the strengths of diverse material platforms within a unified process flow. A promising approach is the 3D integration of InP photonic or electronic membranes to other substrate materials containing photonics or electronics ICs via adhesive bonding. However, wafer-scale spatial distortions arising from the bonding process can compromise fabrication. Herein, we used electron-beam metrology to investigate the distortion of InP membranes resulting from wafer-scale bonding with benzocyclobutene (BCB). We measured both the linear and residual components of distortions across the tested wafers. First, bonding of InP substrate with BCB on various carrier substrates (Si, InP, SiC, and glass) was realized, which unveiled post-bonding membrane expansion factors in the range of ~0-325 ppm and beyond that for the glass carrier. The diversion of these values from theoretical estimations was linked to the adhesive bonding process. Next, we examined the effect of BCB thickness in the ranges of 1-12μm, residual mechanical stress, and the impact of defects on distortions. Using these findings, we experimentally verified that the largest part of distortions can be efficiently pre-compensated to overcome the challenges of multilayer overlay errors in the fabrication of heterogeneously integrated photonic and electronic devices.