We present a high-efficiency, glass substrate-based dual-apodized amorphous silicon (a-Si)/silicon nitride (SiN) grating coupler (GC) with a bottom reflector, optimized for Co-packaged Optics (CPO) applications. The bottom reflector enhances directionality by reflecting and recoupling light dissipated beneath the substrate, while an a-Si overlayer incorporating subwavelength grating metamaterial engineering enhances grating strength and effectively controls the emitted light distribution. Additionally, inverse apodization improves phase matching and reduces diffraction losses. Through Finite-Difference Time-Domain (FDTD) simulation-based optimization, the proposed GC achieves a coupling efficiency (CE) of −0.83 dB and a 1-dB optical bandwidth of 50 nm at 1.31 μm, demonstrating compatibility with deep ultraviolet (DUV) lithography and high fabrication and alignment tolerances. The device maintains CE degradation within ± 0.5 dB under key parameter variations, making it a promising solution for low-loss optical interconnects in CPO systems.
In this Letter, we propose a stitching-loss-tolerant silicon nitride (SiN) waveguide structure that alleviates optical loss caused by reticle stitching, which inevitably arises in i-line stepper lithography suitable for low-cost, large-area fabrication. At a wavelength of 1310 nm, the measured stitching loss of straight waveguides is 0.105 dB/interface. In contrast, tapered waveguides with stitching widths (
W
s ) of 2 µm and 3.5 µm demonstrate significantly reduced losses of 0.0678 and 0.0213 dB/interface. These results pave the way for glass-based panel-level optical interconnect enabled by cost-effective fabrication, addressing a critical bottleneck in next-generation optical packaging.
25 November 2025 in IEEE Photonics Technology Letters
Realizing high-efficiency grating couplers (GCs) on glass substrates for high-bandwidth Co-packaged Optics (CPO) systems is challenging due to optical leakage into the substrate. In this work, we address this challenge by designing, fabricating, and characterizing a uniform silicon nitride (SiN) GC with an aluminum bottom reflector on a glass substrate. The device achieves a peak coupling efficiency of −5.1 dB and a 1-dB bandwidth of 47 nm, a 4.3 dB improvement over the non-reflector device. Furthermore, we demonstrate 106 Gbps Pulse Amplitude Modulation 4-level (PAM-4) transmission, confirming practical applicability. These results provide a valuable foundation for high-performance SiN GCs on a glass substrate platform, enabling their integration into advanced CPO for glass substrate-based optical interconnects in System-on-Wafer (SoW).