Yuki Akura

Yuki Akura

Auto-generated profile, based on publicly available information

Yuki Akura

Department of Micro Engineering, Kyoto University, Kyoto, Japan

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Review of Scientific Instruments
Verified
Journal Article
Closed access
YAYuki Akura
Yuki Akura
YIYasuaki Ikeda
Yasuaki Ikeda
YMYuki Matsunaga
Yuki Matsunaga
MSMasaki Shimofuri
Masaki Shimofuri
ABAmit Banerjee
Amit Banerjee
JHJun Hirotani
Jun Hirotani
The measurement of thermal conductivities of anisotropic materials and atomically thin films is pivotal for the thermal design of next-generation electronic devices. Frequency-domain thermoreflectance (FDTR) is a pump–probe technique that is known for its accurate and straightforward approach to determining thermal conductivity and stands out as one of the most effective methodologies. Existing research has focused on advancing a measurement system that incorporates beam-offset FDTR. In this approach, the irradiation positions of the pump and probe lasers are spatially offset to enhance sensitivity to in-plane thermal conductivity. Previous implementations primarily adjusted the laser positions by modifying the mirror angle, which inadvertently distorted the laser spot. Such distortion significantly compromises measurement accuracy, which is especially critical in beam-offset FDTR, where the spot radius has a crucial impact on measured values. This study introduces an advanced FDTR measurement system that realizes probe laser offset without inducing spot distortion, utilizing a relay optical system. The system was applied to measure the thermal conductivities of both isotropic standard materials and anisotropic samples, including highly oriented pyrolytic graphite and graphene. The findings corroborate those of prior studies, validating the measurement’s reliability in terms of sensitivity. This development of a beam-offset FDTR system without laser spot distortion establishes a robust basis for accurate thermal conductivity values of anisotropic materials via thermoreflectance methods.

6 February 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
YIYasuaki Ikeda
Yasuaki Ikeda
YAYuki Akura
Yuki Akura
MSMasaki Shimofuri
Masaki Shimofuri
ABAmit Banerjee
Amit Banerjee
TTToshiyuki TSUCHIYA
Toshiyuki TSUCHIYA
JHJun Hirotani
Jun Hirotani
Non-contact and non-destructive methods are essential for accurately determining the thermophysical properties necessary for the optimal thermal design of semiconductor devices and for assessing the properties of materials with varying crystallinity across their thickness. Among these methods, frequency-domain thermoreflectance (FDTR) stands out as an effective technique for evaluating the thermal characteristics of nano/microscale specimens. FDTR varies the thermal penetration depth by modifying the heating frequency, enabling a detailed analysis of the thermophysical properties at different depths. This study introduces a machine learning approach that employs FDTR to examine the thermal conductivity profile along the depth of a specimen. A neural network model incorporating dropout techniques was adapted to estimate the posterior probability distribution of depth-wise thermal conductivity. Analytical databases for both uniform and non-uniform thermal conductivity profiles were generated, and the machine learning model was trained using these databases. The effectiveness of the predictive model was confirmed through assessments of both uniform and non-uniform thermal conductivity profiles, achieving a coefficient of determination between 0.96 and 0.99. For uniform thermal conductivity, the method attained mean absolute percentage errors of 1.362% for thermal conductivity and 3.466% for thermal boundary conductance (compared to actual values in the analytically calculated database). In cases of non-uniform thermal conductivity, the prediction accuracy decreased, particularly near the sample's surface, primarily due to the limited availability of machine learning data at higher heating frequencies.

1 August 2025 in Review of Scientific Instruments
Verified
Journal Article
Closed access
YAYuki Akura
Yuki Akura
YMYuki Matsunaga
Yuki Matsunaga
LLLijun Liu
Lijun Liu
YIYasuaki Ikeda
Yasuaki Ikeda
MSMasaki Shimofuri
Masaki Shimofuri
JHJun Hirotani
Jun Hirotani
The thermal transport properties of materials are critical in the thermal design of electronic devices, particularly as these designs increase in complexity. Modern devices frequently incorporate materials with low thermal conductivity, such as insulators and flexible substances used in wearable technology. Frequency-domain thermoreflectance (FDTR) is a common method for measuring thermal conductivity due to its simplicity and accuracy. However, challenges arise when measuring materials with low thermal conductivity, as the sensitivity of the measurement diminishes. This reduction in sensitivity is primarily due to significant lateral heat transfer within the metal transducer on the sample’s surface, complicating the precise determination of thermal conductivity. This study introduces a method to enhance measurement precision by minimizing heat transfer within the transducer. This approach involves selectively patterning the transducer and positioning it near the laser irradiation point to curtail internal heat transfer. This strategy ensures that heat transfer within the sample predominates, thereby augmenting the sensitivity of thermal conductivity measurements. We employed a finite element model to evaluate the effectiveness of this technique and established that transducer patterning notably diminishes the uncertainty in measured thermal conductivities. Validation was achieved by measuring the thermal conductivity of glass [1.216 ± 0.056 W/(m K)]. This measurement is consistent with anticipated values for glass conductivity and demonstrates a reduction in uncertainty to less than one-fourth of that observed in conventional FDTR measurements. Such improvements highlight the method’s capability to yield precise thermal conductivity measurements for low-conductivity materials. This advancement addresses the growing imperative for advanced thermal design in modern electronic devices.

2 January 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
RYRyuto Yamasaki
Ryuto Yamasaki
YMYuki Matsunaga
Yuki Matsunaga
YAYuki Akura
Yuki Akura
MSMasaki Shimofuri
Masaki Shimofuri
ABAmit Banerjee
Amit Banerjee
JHJun Hirotani
Jun Hirotani
Measurement of thermal conductivity in liquids and soft materials is pivotal across various sectors, from designing cooling systems for electronic devices to monitoring biological parameters via medical devices and studying the thermal properties of tissues. Accurate thermal conductivity measurements require high sensitivity, and a flexible measurement device is advantageous to adapt to the shape of the sample. The 3ω method stands out as an ideal technique that meets these criteria, offering a simple and sensitive approach to assess the thermal properties of materials. In this study, we introduce a 3ω sensor fabricated on submicron-thick parylene substrates. The parylene substrate not only provides the necessary flexibility but also acts as an insulating layer, essential for the measurement of conductive materials. The sensor's sensitivity was enhanced by reducing the thickness of the parylene substrate. A thermal peeling film was utilized as a supporting substrate during the fabrication of the 3ω sensor with a thin parylene substrate, which has a thickness of 0.77 μm. The performance of the sensor was evaluated by measuring the thermal conductivities of water, isopropyl alcohol, and their mixtures, achieving results within 15% of previously reported values.

1 March 2023 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
YAYuki Akura
Yuki Akura
MSMasaki Shimofuri
Masaki Shimofuri
ABAmit Banerjee
Amit Banerjee
JHJun Hirotani
Jun Hirotani
TTToshiyuki TSUCHIYA
Toshiyuki TSUCHIYA
In this study, we developed a model of field emission at a vacuum nanogap composed of semiconductor electrodes and conducted numerical calculations to evaluate its field emission characteristics. The current at the silicon nanogap was also measured, and the results were compared with the calculated results. Large-area vacuum nanogaps are expected to be used for highly efficient room-temperature thermionic power generation owing to their good thermal insulation, and their electrical conduction of tunneling current is sufficient for practical use. Because vacuum nanogaps should be parallel and smooth with a large area, we proposed and examined the use of cleavage to fabricate nanogaps in single-crystal materials. A nanogap with a nominal area of 26.5 μm2 was fabricated in a microelectromechanical device to evaluate its properties, and the model was used for the analysis. The calculated current–voltage characteristics of the semiconductor nanogap of both n-type and p-type silicon were affected by the bandgap and the presence of carriers, i.e., electrons and holes. Moreover, the Fowler–Nordheim plot was confirmed to be valid for semiconductor nanogaps based on the calculated results. We proposed an effective work function that compensates for the discrepancy between semiconductor nanogaps and the Fowler–Nordheim theory and enables a more accurate analysis. Field-emission currents flowing through a 1.1 nm nanogap were measured and matched with the calculated results by adjusting the field enhancement factor and emission area. The model developed and confirmed experimentally in this work will be helpful in examining field emissions at semiconductor nanogaps.

12 May 2026 in Journal of Applied Physics
Verified
Journal Article
Closed access
YAYuki Akura
Yuki Akura
YIYasuaki Ikeda
Yasuaki Ikeda
LLLijun Liu
Lijun Liu
JHJun Hirotani
Jun Hirotani
Nanoscale thin films are a fundamental building block of modern electronic and spintronic devices, and accurate characterization of their heat transport properties is essential for reliable design. However, measuring the in-plane thermal conductivity of substrate-supported nanoscale films remains difficult due to limited measurement sensitivity. This study introduces an approach that enables such measurements by integrating frequency-domain thermoreflectance (FDTR) with a multilayer stacked structure in which the target film and an interlayer are alternately deposited. This configuration increases the cumulative in-plane heat flow through the target layers while preserving the nanoscale thickness of each individual film. Using a fitting procedure that constrains identical parameters within the stack to shared values, the FDTR response becomes strongly sensitive to the in-plane thermal conductivity of the target film. The method is validated using a theoretical FDTR model. For instance, a 10 nm titanium film with a thermal conductivity of 16.8 W/(m K)—a case in which conventional FDTR yields insufficient sensitivity—exhibits an 11.5-fold enhancement in maximum sensitivity and a reduction in uncertainty to 13.6% when 30 stacked repetitions are used. Additional calculations for films with varying thicknesses and materials demonstrate that the method is suitable for nanoscale films commonly employed in devices, with thermal conductivities from 1 to 100 W/(m K) and thicknesses from 1 to 100 nm. This approach provides a practical and scalable means to experimentally evaluate in-plane thermal transport in nanoscale thin films and supports improved understanding of their thermal behavior in device applications.